suma

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from Mister Frag on 1:42 am on Nov. 28, 2001 There are new drivers for some SoundBlaster Live and Audigy models and OS combinations, if you are having problems, they might be worth checking out. SB Live: <a href="http://www.3dsoundsurge.com/drivers/Live/Windows2000.html Audigy:" target="_blank">http://www.3dsoundsurge.com/drivers/Live/Windows2000.html Audigy:</a> http://www.3dsoundsurge.com/drivers/Audigy/index.html <span id='postcolor'> I wanted to check the drivers you are talking about, but there is plenty of links at 3dsoundsurge. Which one should I use?

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">The answer is simple. Each major grid consists of 10 minor grids, from A to J. Each minor grid is 125 meters. So each major grid is 1.25 kilometers. <span id='postcolor'> You are almost there. Map size is 12.8 km (256x50 m). Grid size is therefore 1.28 km (large grid) or 128 m (fine grid).

#Moderation Mode Discussion about forum rules is considered offtopic. Moved here

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from Jonstyle on 12:51 pm on Nov. 28, 2001 Well if YOU dont, who the #### has?? <span id='postcolor'> Nobody. We did not use 3DStudio MAX for modelling.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Ondrej, I've reported problems with Hellfires missing from Apaches and empty M113 HUDs in clean OFP 1.30 upgrades with no unofficial addons present. <span id='postcolor'> This is completely unrelated. Missing hellfires are related to A10 LGB drawing. Empty M113 seems to be there since 1.00 (I am not sure on this, though).

Yes. I am reading. I tryied to check this, but unfortunatelly on my computer even Gunslingers addon runs ok. I suggest trying to remove units one by one from the addon on some computer that exibits the problem to see which class is causing problems. Once we have some minimal addon, we will be able to investigate it. Gunslingers addon is too large and complicated and it is therefore quite hard to guess what is the problem. Some smaller test case exibiting same problem is needed.

There are no news about SDK. We are still to busy with patches and general documentation to be able to think about releasing modelling and other tools soon. We cannot not release any "model import/export plugin", as we do not have any.

It looks like docs are not included in the package (although it is written in the readme file they are). You can download them on several websites, e.g. Coldwar.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">I normally get pings of 129-192 on Nascar4 (on 56K!!!!!)....and the lowest I have EVER seen on OFP are in the high 300-low 400 range. <span id='postcolor'> The ping is almost not influenced by the game. It depends on network connection between you and the server. If you see higher pings with OFP than with other games, it is most probably because servers are not positioned as close to you as for other games.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Hi there, sometimes the suqad.xml dosnt show on some server just wondered why hehe, it shows If I host on my own ip but not on some servers. <span id='postcolor'> The reason for this may be that internet connection is not configured correctly on the server. Server needs to be able to download xml file from Squad URL - and for this it needs working internet connection via HTTP protocol.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BigQEd on 11:46 am on Nov. 27, 2001 I would like to know how bans can be done from Admin commands if possible... I had heard #ban <id> but that does not seem to work. Also if you manually add a Ban to the ban.txt is there anyway to make it active immediately without a server restart?<span id='postcolor'> #ban command works only on non-dedicated server (it saved info into user profile ban list). As for banning without restarting server, this is currently not possible, but we will add in hopefully in next patch.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">All I am asking for is a little news. Oh and could you update your site at least once a month? It has been over 3 months since any updates. <span id='postcolor'> Are you talking about www.flashpoint1985.com site? As far as I know, last update there was Scripting reference two weeks ago.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">If I get info on the banning part - I'll do that as well, so you can BAN/UNBAN a spec. player. <span id='postcolor'> Did you take a look into 1.30 server docs? If anythink is not covered there, please ask here. You may also try searching this forum for "ban" subject - you should get at least two subjects convering this.

Please send us crash files as suggested in Troubleshooting FAQ

Note: First you have to set timer to 30 sec, then you will see options to adjust it.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Still getting the same message server load xxFPS, nothing else..am I doing something wrong? hopefully this will come out ok..here goes... STR_SERVER_MONITOR,"Server load: FPS %.0f, memory used: %.0f MB, out: %.0f Kbps, in: %.0f Kbps",... <span id='postcolor'> I think you have it right. Be aware you should change it on client machine (where you display the results).

Yes, it will be fixed. You can try seaching in betatesting forum if you want to know more.

Confirmed bug, see http://www.flashpoint1985.com/cgi-bin....pic=654 for more information including hotfix.

Update: There is a bug in strintable.csv that prevents the text from showing correctly. This bug has been introduced during translation to non-english languagues. Fix will be available in next patch. If you want, you can fix it manually by editing stringtable.csv file on the client. Be sure to backup original file, as you will need it back when you will install next patch, otherwise it will not recognize it as correct version. Search for "STR_SERVER_MONITOR" line. In this line you will see several comma delimited entries. There are double quotes missing around engtries, which causes parser confusion. Instead of STR_SERVER_MONITOR,Server load: FPS %.0f, memory used: %.0f MB, out: %.0f Kbps, in: %.0f Kbps, The line should read STR_SERVER_MONITOR,"Server load: FPS %.0f, memory used: %.0f MB, out: %.0f Kbps, in: %.0f Kbps", (and similiary for other languagues).

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Is there a new #monitor command to display the up/downstream bandwidth? <span id='postcolor'> When you type #monitor while logged in as admin, you should receive messages about server fps and both up- and down- stream bandwidth.

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE"> On this BMP-1 you will notice something you dont see in the Final release of the retail version. Its the AT-3 Sagger on its launch rail , Â I know you can fire it , but you cant see it. <span id='postcolor'> It was removed because it was always on the rail. It did not disappear after firing, it did not disappaear when you had no more missiles. We did not have time to implement it properly as we intended, therefore we removed it.

If only exe files are invalid, chance is you might be affected by some virus infecting exe files. Could you try scanning your computer for viruses with up-to-data virus database?

We did not test such configuration yet. My guess is you could try: MaxMsgSend = 256 MinBandwidth = 512000 Best way is to try and see what works best. When talking about 2Mb line, be sure you really have mb upstream (upload), not only downstream. You can use #monitor admin command to see what bandwidth your server really uses both up- and downstream.

To see oficial command reference go to editing section of our web site or directly to Online Command Reference

See dedicated server docs inlcuded in 1.30 Upgrade download.