Jump to content

pynaple

Member
  • Content Count

    30
  • Joined

  • Last visited

  • Medals

Everything posted by pynaple

  1. pynaple

    Sound troubles

    I just got an Audigy 2.0-ZS and on 5.1 all is good in ofp. EAX enabled no pops or cracks. With the configuration utility and the latest drivers , setting up speakers for surround sound is good, tuning the sound to conform to the room you are in, speaker placement and angle, with the results being a very smooth transition between all the speakers. On stereo speakers, using the CMSS function worked good to centre the sound and broaden the aspect to suit room and speaker placement. (no sneaking tanks). And most importantly All worked great in ofp!! 1.96, I'm impressed with the upgrade Alot of stuff on the Platinum it seems you just don't need, all settings it seems are enabled to play with, a good cut down version.
  2. pynaple

    Cat 4.1 problems?

    I'm running a gexcube radeon 9800xt, with 4.2 catalyst. With a fresh install of ofp all worked great, Following: 1. Install game.        2. Patch        3. Run preferences "Auto Detect"        4. Play It was only when I tried turning everything up in the options, things turned bad! Definately 75-85hz seems to work okay even 100hz worked. High detail turned right up was okay.(Not Terrain Detail). FPS maxxed was good. Distance maxxed everything still good, but a bit choppy p4 3.2ghz. 1gig Ram Terrain Detail from Normal to Very High,only after turning down the view distance to make Very High available. This was the straw that broke the camels back!! Game crashed big time with a cannot createVertexPixel (static, "something else cannot remember") out of memory ? Or something very similair to this. And wouldn't get past the splash screens, without the same Error msg. With a solution, replacing the config and preferences from an earlier installation, this would allow game to load allowing me back into options, manually changing figures in file didn't work. But now I had invisible units with floating guns....hmmm Fresh install followed the 4. points above clean or with addons all seems to work on the radeon. with AA, and A-stropic right up, I was grabbing for a box of tissues.
  3. pynaple

    Connection lost...

    Here's the setup we had for the LAN: P2-350, 256MB ram. Linux firewall/router/DHCP server. Firewall distro is IPcop  (www.ipcop.org). All pc's connected to 8 port 10/100 switch P4-1.6, Radeon 9500 Pro, 768MB Ram, Windows XP Pro. P4-2.53, GF4 Ti 4600, 512MB Ram, Windows XP Pro. P3-800, GFgts2, 256MB Ram, Windows 2000, Zone Alarm Pro, disabled Zone Alarm Pro then Uninstalled in an attempt to resolve loosing connection.
  4. pynaple

    Connection lost...

    Suma, The problem for me seemed to creep in firstly with 1.91 as a Beta, two other p.c's on a Lan 3 in total. 2 patched to 1.90 1 patched to 1.91 beta. Very soon after release within 1 month from memory. After reinstall of OFP to 1.90, the same connection lost problem remained so it seemed that 1.85, for me, didn't cause the problem. All c.d's  were purchased 1985 and Res. One p.c. had RedHammer campaign. (*gold upgrade). I will get Lan details and the other system specs, this I'll post soon.
  5. pynaple

    I cant move but game responds!

    After you re-installed did you turn your view distance down or is it down far enough?
  6. pynaple

    1.92, o my goodness bis is the best 4eva

    Thank's BIS you Rock!!
  7. pynaple

    Is a new patch needed?

    With the Serious loss of data on partition and loosing connection problems maybe we should put it to a vote so BIS and CM can get an idea of what the best approach could be for the greater community.
  8. pynaple

    Ofp multiplayer/netcode bug.

    I agree very annoying!! 1.91 final, loosing connection problems. *see also connection lost thread And in the game dev's word's "There's a serious problem in Operation Flashpoint 1.75 and above (including versions 1.90/1.91). As Nyles mention's are you aware of this loosing connection problem in M/P? and if so what is it's possible cause? If the community are getting partitions deleted and loosing connection for no apperent reason, other than to be using 1.75 => and nothing is done about it, ofp2 will be a hard sell to those all but devoted fans. (Once bitten twice shy).
  9. pynaple

    Connection lost...

    fully reinstalled from cwc to 1.91 minus red hammer caus of patching errors minus all campaign updates caus of patching errors, minus non official addons. same connecion lost problems mid game M/P only solution Alt+Tab open a browser window before you get dropped from the game. Tried leaving a browser window open, this seemed to work, not sure though out of 6 games 5 were ruined caus of this problem the final one I kept a browser window open and got a full game out of her without Alt+Tab work around. 1.85 didn't cause this problem.
  10. pynaple

    1.91 patching problems

    bump and Here
  11. pynaple

    Problems with resistance

    bump
  12. pynaple

    Installation order

    bump
  13. In a gamelogic INIT: setViewDistance 1200 for all players or if you want it set only to a certain unit or vehicle put the same into the unit or vehicles INIt: hope this helps.
  14. pynaple

    1.91 patching problems

    bump
  15. pynaple

    Ofp: res. walkthroughs

    Not a complete Walkthrough Yet due to Ill health had to put ofp on hold. But it will definately get you started on the command console Avon FAQ Search 'Walkthrough'
  16. pynaple

    Red hammer 1.85-1.90-1.91

    Where's the Red Hammer 1.85 Mission #6 compatabiltiy Patch gone ?? Codemasters still have it available on thier site But. Has this been replaced by the 1.90 Red Hammer Patch? Or is this now the 1.90-1.91 compatability patch caus there isn't anything to get it from 1.75-1.90, other than a previously released 1.85 mission#6 patch now not on downloads page here,but still up at Codemasters?? Here's a sample of error.log created by patch 190 after installing 1.85 mission #6 fix \Codemasters\OperationFlashpoint\CAMPAIGNS\redhammer.pbo: bad size: 16742967 (old=16754925, new=16742967) As you can see this is a really shitty time for patching to start going wrong prolly 2 or 3 from Reinstall being finished. Below is a readme with instructions to use 190.exe for 1.91 update. ***** OPERATION FLASHPOINT: Red Hammer Update 1.91 README ***** This package will fix some troubles in Red Hammer Campaign from Operation Flashpoint: Gold edition in version 1.91. REQUIRED: ========= ORIGINAL VERSION OF OPERATION FLASHPOINT: CWC with Gold Upgrade (or Gold Version) and OPERATION FLASHPOINT: RESISTANCE. Patch 1.91 installed. You don't need this patch if you have OERATION FLASHPOINT: Game of the Year edition! More info about upgrades and patches can be found on www.codemasters.com/flashpoint or www.flashpoint1985.com. HOW TO INSTALL: =============== Simply run OFP_RedHammerUpdate190.exe. It will update your RedHammer.pbo file in Campaigns folder. From searching on this Forum regarding this subject and Avon's faq troubleshooting and reinstalling Ofp. (you can imagine restarting Win2000 each major patch install). Can this be cleared up please as the readme's aren't shedding any light on the subject. Â I don't like feeling this way about OFP!!
  17. pynaple

    Connection lost...

    'BUMP'
  18. Prolly the easiest to understand tutorial on oxygen, with very simple to follow step by step instructions. A bloody pleasure to follow!! cheers mate, pynaple
  19. pynaple

    Connection lost...

    This problem has also crept into my ofp gameplay, either LAN or M/P running 1.90 or 1.91 no addons. This was also with FW on and off. Â Â Sent necessary info to BIS support will try the alt tab work around for now, cheers if it works for me.
  20. pynaple

    Operation lojack coop released

    I had to post regarding this mission 'Lojack'. Great mission toadlife!! Very,Imaginative scripting!! As a co-op mission this truely rocks. A very big thumbs up. pynaple....out
  21. pynaple

    Resistance walkthrough

    Have sent you a P/M avonlady, regarding OFPR walkthrough please let me know what you think. pynaple...out
  22. Also a little note you can use the + or - keys on numpad to zoom in and out of map, for those precision placements. you gotta crawl before you walk and walk before you run. [x,z,y] co-ordinates can come later when you've used the editor a bit more. Have fun pynaple...out
  23. pynaple

    Minimum requirements contd

    As the topic was locked and I was not able to use the quote function here's my answer to both of you!! Taking into consideration this official forum is used as a hub for information for old players and new. *quote LBGS_Stewart .. Group: Members Posts: 134 Joined: Jan. 2002  Posted: Aug. 04 2002,07:11   -------------------------------------------------------------------------------- i am kinda courious  but what is the point of this thread.    if they wanna know the system specs then they should look at the lable on the box or look at the specs on the web  -------------------------------------------------------------------------------- *unquote Also *Quote placebo Über Verwalter Group: Moderator Posts: 1988 Joined: July 2001  Posted: Aug. 04 2002,07:21   -------------------------------------------------------------------------------- I see no real point to this thread, but the effort to help others out is of course commendable  -------------- OFPN-Resistance is futile......  *Unquote Upon spending the time checking the search function provided by this Official forum and finding the wrong information and then checking the Avon Lady FAQ who does a real good job, yet finding that not quite correct and the BIS Resistance web site also not the correct information. With the broadness of mind to figure some people don't have Resistance yet,don't have the time to make a special visit to a shop to read a box,have physical difficulties (wheel chair bound) or only have the original OFP that only just runs on thier p.c. maybe wanting to upgrade would like to know this information, from what I've read some players were hard up to check the options in Resistance to turn down view distance and terrain detail until smooth. Placebo if your the same one from OFPL I'd expect this sort of closed minded comment (showing promise in the last couple of words). Between the two of you being too concerned who's turn it is to go last in a game of soggy biscuit. You may have noticed this also. Just trying to keep an informative Forum informative GET THE POINT. pynaple ...out
  24. pynaple

    Minimum requirements

    Dunno but this may help a few of you MIMIMUM SPECS: Windows 98/ME/2000/XP DirectX 8.1 Pentium or Athlon 500 CPU 128Mb RAM 16 Bit DirectX 8.1 compatible sound card Compatible 3d Graphics Card with 16Mb RAM 250Mb Free Hard Drive Space After Installation RECOMMENDED Windows 98/ME/2000/XP DirectX 8.1 Pentium or Athlon 700 CPU 256Mb RAM 16 Bit DirectX 8.1 compatible sound card Compatible 3d Graphics Card with 32Mb RAM 500Mb Free Hard Drive Space After Installation GRAPHICS CARDS 3dfx - Voodoo3, Voodoo4, Voodoo5 ATI - Rage 128 pro, Radeon Matrox - G400, G450, G500, G550 Nvidia - Riva TNT, Riva TNT2, GeForce, GeForce2, GeForce3, GeForce4 S3 - Savage 2000 PowerVR - Series 3 (Kyro II)
×