Jump to content

pynaple

Member
  • Content Count

    30
  • Joined

  • Last visited

  • Medals

Community Reputation

0 Neutral

About pynaple

  • Rank
    Private First Class
  1. pynaple

    Sound troubles

    I just got an Audigy 2.0-ZS and on 5.1 all is good in ofp. EAX enabled no pops or cracks. With the configuration utility and the latest drivers , setting up speakers for surround sound is good, tuning the sound to conform to the room you are in, speaker placement and angle, with the results being a very smooth transition between all the speakers. On stereo speakers, using the CMSS function worked good to centre the sound and broaden the aspect to suit room and speaker placement. (no sneaking tanks). And most importantly All worked great in ofp!! 1.96, I'm impressed with the upgrade Alot of stuff on the Platinum it seems you just don't need, all settings it seems are enabled to play with, a good cut down version.
  2. pynaple

    Cat 4.1 problems?

    I'm running a gexcube radeon 9800xt, with 4.2 catalyst. With a fresh install of ofp all worked great, Following: 1. Install game.        2. Patch        3. Run preferences "Auto Detect"        4. Play It was only when I tried turning everything up in the options, things turned bad! Definately 75-85hz seems to work okay even 100hz worked. High detail turned right up was okay.(Not Terrain Detail). FPS maxxed was good. Distance maxxed everything still good, but a bit choppy p4 3.2ghz. 1gig Ram Terrain Detail from Normal to Very High,only after turning down the view distance to make Very High available. This was the straw that broke the camels back!! Game crashed big time with a cannot createVertexPixel (static, "something else cannot remember") out of memory ? Or something very similair to this. And wouldn't get past the splash screens, without the same Error msg. With a solution, replacing the config and preferences from an earlier installation, this would allow game to load allowing me back into options, manually changing figures in file didn't work. But now I had invisible units with floating guns....hmmm Fresh install followed the 4. points above clean or with addons all seems to work on the radeon. with AA, and A-stropic right up, I was grabbing for a box of tissues.
  3. pynaple

    Connection lost...

    Here's the setup we had for the LAN: P2-350, 256MB ram. Linux firewall/router/DHCP server. Firewall distro is IPcop  (www.ipcop.org). All pc's connected to 8 port 10/100 switch P4-1.6, Radeon 9500 Pro, 768MB Ram, Windows XP Pro. P4-2.53, GF4 Ti 4600, 512MB Ram, Windows XP Pro. P3-800, GFgts2, 256MB Ram, Windows 2000, Zone Alarm Pro, disabled Zone Alarm Pro then Uninstalled in an attempt to resolve loosing connection.
  4. pynaple

    Connection lost...

    Suma, The problem for me seemed to creep in firstly with 1.91 as a Beta, two other p.c's on a Lan 3 in total. 2 patched to 1.90 1 patched to 1.91 beta. Very soon after release within 1 month from memory. After reinstall of OFP to 1.90, the same connection lost problem remained so it seemed that 1.85, for me, didn't cause the problem. All c.d's  were purchased 1985 and Res. One p.c. had RedHammer campaign. (*gold upgrade). I will get Lan details and the other system specs, this I'll post soon.
  5. pynaple

    I cant move but game responds!

    After you re-installed did you turn your view distance down or is it down far enough?
  6. pynaple

    1.92, o my goodness bis is the best 4eva

    Thank's BIS you Rock!!
  7. pynaple

    Is a new patch needed?

    With the Serious loss of data on partition and loosing connection problems maybe we should put it to a vote so BIS and CM can get an idea of what the best approach could be for the greater community.
  8. pynaple

    Ofp multiplayer/netcode bug.

    I agree very annoying!! 1.91 final, loosing connection problems. *see also connection lost thread And in the game dev's word's "There's a serious problem in Operation Flashpoint 1.75 and above (including versions 1.90/1.91). As Nyles mention's are you aware of this loosing connection problem in M/P? and if so what is it's possible cause? If the community are getting partitions deleted and loosing connection for no apperent reason, other than to be using 1.75 => and nothing is done about it, ofp2 will be a hard sell to those all but devoted fans. (Once bitten twice shy).
  9. pynaple

    Connection lost...

    fully reinstalled from cwc to 1.91 minus red hammer caus of patching errors minus all campaign updates caus of patching errors, minus non official addons. same connecion lost problems mid game M/P only solution Alt+Tab open a browser window before you get dropped from the game. Tried leaving a browser window open, this seemed to work, not sure though out of 6 games 5 were ruined caus of this problem the final one I kept a browser window open and got a full game out of her without Alt+Tab work around. 1.85 didn't cause this problem.
  10. pynaple

    1.91 patching problems

    bump and Here
  11. pynaple

    Problems with resistance

    bump
  12. pynaple

    Installation order

    bump
  13. In a gamelogic INIT: setViewDistance 1200 for all players or if you want it set only to a certain unit or vehicle put the same into the unit or vehicles INIt: hope this helps.
  14. pynaple

    1.91 patching problems

    bump
×