gamerz971hd 10 Posted October 24, 2013 Hello Everyone! Trying to configure my ArmA 2 Server's basic.cfg and i'm running into a few problems. I tried using the mathematical equation to calculate it but i get no luck. Tried Google and searching the forums, none of them made it any better, but worse.. We used to have a perfect basic.cfg until it was deleted by accident by another Admin :mad: Server starts at 50 fps and as people join it just goes down, and down, and down. The lowest i seen it was at 3 fps. with about 10 people in it. Server Specs: Intel Xeon E3-1270v3 processor (four physical 3.5ghz cores on QPI + hyperthreading + turbo->3.9ghz) 32 GB DDR3-1600 ECC memory 240 GB SSD and 2000 GB, 7200 RPM SATA hard drive 12000 GB of InterNAP bandwidth Current Basic.cfg: MaxMsgSend=16384; MinBandwidth=100428800; MaxBandwidth=104857600; MinErrorToSend=0.0049999999; MinErrorToSendNear=0.0099999998; MaxCustomFileSize=160000; adapter=-1; 3D_Performance=93750; Resolution_W=0; Resolution_H=0; Resolution_Bpp=32; Windowed=0; serverLongitude=-115; serverLatitude=36; serverLongitudeAuto=-115; serverLatitudeAuto=36; Once again the server is going to be holding 60 people at once sooo... Hope i can get some help, thanks Share this post Link to post Share on other sites