Changing infoboards or fob signs?

[DieselJC 196]

I'd like to add a custom graphic to an info board or better yet a FOB sign..I have done this with a flag with no issues..but when trying the same image on a FOB sign it gives me an error of 2 set variables expected..I assume its because the board is one and the sign on it is another...is their a way to have a custom graphic show up on the sign? Ive done a search but havent found anything..and keep playing around with "this setObjecttexture" etc etc..and cant get it to work..any help would be great...

JC

[(AEF)Swordsman 10]

When I did this for a mission I found the image had to be square (so 64x64 or 128x128 etc.). So I made the image the dimensions I wanted and then squashed it down to a square - when it applied to the board it stretched back out to look normal :)

Code used was:

this setObjectTexture [0,"imgs\pindersign1.paa"];

Here's the image if you want to try it yourself and see if it works:

http://mirror.aef-hq.com.au/~arma/misc/pindersign1.paa

[DieselJC 196]

When I did this for a mission I found the image had to be square (so 64x64 or 128x128 etc.). So I made the image the dimensions I wanted and then squashed it down to a square - when it applied to the board it stretched back out to look normal :)

Code used was:

this setObjectTexture [0,"imgs\pindersign1.paa"];

Here's the image if you want to try it yourself and see if it works:

http://mirror.aef-hq.com.au/~arma/misc/pindersign1.paa

Thanks Swordsman..much appreciated will give that a try!

Edit: That did it..works great!! Thanks for the help..much appreciated!

JC

Edited January 7, 2012 by Diesel Tech JC