yuukan

Does anyone have more details as to why Battle Eye Extended controls has been terminated and if there is a viable alternative in place already ? http://ibattle.org/

Sorry about that we have setup a new Youtube channel for this project. You can the new channel at the below link. https://www.youtube.com/channel/UCLFSFcHjYp8hpQZAungxzNQ

Hi Folks I've thrown in the towel here and moved back to Visitor 3 for the bulk of my work, I have resolved a few of the problems, however there are still problems that greatly impact the build of the project. Comments about the issue and possible resolution are below in Red 1) A random objects had sunken into the ground. (This was a somewhat random mix of Arma 2 buildings, along with some objects of the same type appearing to be sunken into the ground. eg. Custom Tree's had sunked into the ground in region A, however the same tree type in Region B, had retained their position and height.) Objects sinking into the ground appears to occur when the object file has been binarized after you have placed the object on the map. To resolve this try extracting your Arma 2 content into your CA folder again. 2) Terrain builder appears to lock up a pc, by maxing out hard disk I/O (input output) causing your PC to lockup(however you can still hear audio, move your mouse and speak via Teamspeak. All proccess that do not require disk access as the data is loaded into your RAM.) Opening any drop down tab in Terrain Builder stops this for a brief moment, before continuing again to consume large amounts of Hard Disk I/O. This behaviour continues for about 10-30 minutes, before resolving itself. (Potential leak when loading objects, or processing loop ?) This is something that I cannot appear to find a fix or resolution for. Reccomendation here is that you select one of the drop down menu's when you are in Terrain Builder, as this will clear the lock as long as the menu is open. 3) Object location changes when transferring the project folder between team mates. -Objects that have been placed previously appear to randomly change their Height and their locations, when we zip up the project file and open it up on another computer. -We have all downloaded the same project files, that we created and shared from a single location. (A3, CA and other folders.) -Roads tend to "straighten out", or they simply loose all their turns after zipping and copying the file across. This one was interesting. Terrain Builder does NOT store all the parameters for your project in the project folder, it appears that certain values like map or object heights are stored in Terrain Builder itself, as it generates new files with each project you open. To resolve this try copying your active "Terrain Builder" folder along with your project files. You will need to overwrite your current Terrain Builder with your team mates Terrain Builder folder. 4) Certain objects change location on local machines after saving the project. - A portion of the map I have spend several hours updating and correcting the sunken buildings issue has, "resunk" several hours after the project has been worked on and saved. - With no changes done to the file or the folder. This one was interesting. Terrain Builder does NOT store all the parameters for your project in the project folder, it appears that certain values like map or object heights are stored in Terrain Builder itself, as it generates new files with each project you open. To resolve this try copying your active "Terrain Builder" folder along with your project files. You will need to overwrite your current Terrain Builder with your team mates Terrain Builder folder. In Summary: I still encounter problems with some objects not sticking to their true relative size, along with roads becoming disjointed, disconnected and even loosing their left and right turns, because I do not have a view indepth of how Terrain Builder functions, it is not possible for me to fully determine why that works in Visitor 3 does not work in Terrain Builder. Visitor 3 is the matured tool set, and for now I will be sticking to it. I do hope that the team at BI will keep up their work and keep up the development with Terrain Builder, as it does seem to function generally there are still bugs and issues that need to be addressed with it.

After many hours of testing and observation we've managed to tackle most of the issues. I'm going to log for the evening, and tomorrow morning I'll post a reason and method to fix for each of the bugs / issues encountered.

@Atsche How did you transition over from Visitor 3 to Terrain Builder. Did you import your .Pew or your .WRP file ?

We are seeing it with Arma 2 content primarily, and some custom content. Essentially we are working on the map pretty straight forward, by adding the content into the Templates library, placing them on the terrain and then adjusting the angle and position to get the right look and feel. I would probably look at the content libraries in my P:\CA and P:\A3 folders if it wasn't for the fact that it is not all content of that type that is experiencing this. I though initially that maybe we made a mistake and binarized some of our objects, however when we go back to the backup of our visitor 3 content it all appears fine. I do not see any problem with working on this content in Visitor 3, and only experiencing these irregularities when we start working in Terrain Builder. So the next option you would think is just to re-create the content libraries from scratch. Doing this hasn't resolve the issue either and still see's us experiencing the problems shortly afterwards.

This is not a flame post, I just want to highlight some issues that me and my team are facing,and in the process of resolving this I hope that the community can benefit from the knowledge if they are experiencing the same issue. Me and my team are currently facing crippling issues with Terrain Builder (Visitor 4), when attempting to continue map development with Terrain Builder. Our setup is as follows. (Steam Current content BuildID: 232541) Each one of us has a mid to high end gaming PC, all running SSD hard disks, nVidia Graphics cards above the GT 680, Intel I7 core proccesors. We keep 1 active project file between the team, which is strickly controlled and modified, by a single person. All other team members work on their own Project files. Each team member will download the "current" version of the project folder, before starting their work. They delete the project folder(P:\Project_Name) on their P:\ and over write it with the new "LIVE" project folder. Adding content to the new "LIVE" folder is done by copying and pasting roads and objects into the current "LIVE" Terrain Builder project. In short the content is ripped from each project and merged into a single one. We are launching Terrain Builder from our P:\ and NOT from Steam Issues began occurring following the Arma 3 Tools update on 10/April/2014. Initial issue was spotted when launching terrain builder after the update. I will be very clear. This problem is not due to us "merging" the projects. Following the method described above from our original and untouched Visitor 3 project, we can readily recreate all the issues listed below. 1) A random objects had sunken into the ground. (This was a somewhat random mix of Arma 2 buildings, along with some objects of the same type appearing to be sunken into the ground. eg. Custom Tree's had sunked into the ground in region A, however the same tree type in Region B, had retained their position and height.) 2) Terrain builder appears to lock up a pc, by maxing out hard disk I/O (input output) causing your PC to lockup(however you can still hear audio, move your mouse and speak via Teamspeak. All proccess that do not require disk access as the data is loaded into your RAM.) Opening any drop down tab in Terrain Builder stops this for a brief moment, before continuing again to consume large amounts of Hard Disk I/O. This behaviour continues for about 10-30 minutes, before resolving itself. (Potential leak when loading objects, or processing loop ?) 3) Object location changes when transferring the project folder between team mates. -Objects that have been placed previously appear to randomly change their Height and their locations, when we zip up the project file and open it up on another computer. -We have all downloaded the same project files, that we created and shared from a single location. (A3, CA and other folders.) -Roads tend to "straighten out", or they simply loose all their turns after zipping and copying the file across. 4) Certain objects change location on local machines after saving the project. - A portion of the map I have spend several hours updating and correcting the sunken buildings issue has, "resunk" several hours after the project has been worked on and saved. - With no changes done to the file or the folder. I believe the problem is linked to the recent update - This issue has been observed on 4 different user machines. - The issue has been recreated on each machine with new Visitor 3 -> Terrain Builder imports being carried out. (.pew was imported) - 2 Machines have been working with Arma 3 Tools before the update. - 2 Machines have encountered this issue, after they had a first time install of Terrain Builder. I would prefer to stick to Visitor 3, however we do not have access to the Arma 3 Objects with Visitor 3.

Nice spot Migebuff Most likely there is a registry entry that is not being updated correctly and is attempting to launch buldozer from "C:\Program Files (x86)\Steam\SteamApps\common\Arma 3 Tools", though a possible work around would be to copy a working version of buldozer into this location ? It seems that this was missed between Visitor 3 and Visitor 4(TerrainBuilder). Does Visitor 4(TerrainBuilder), use the same registry entry as Visitor 3 ? I'm not finding a registry folder for Visitor 4(TerrainBuilder) ---------- Post added at 08:35 ---------- Previous post was at 08:21 ---------- What is the likely-hood that the problem is caused by the .DLLs as opposed to a registry entry ?

I'm encountering an issue with Buldozer aswell. When attempting to launch it from Terrain Builder, it simply zooms into a point on the map and then nothing further occurs. I have tried the reccomended fix, along with installing BI Tools 2.51 over the Arma 3 Server Tools, along with trying the Arma 3 tools Dev.