Jump to content

WolfK33

Member
  • Content Count

    38
  • Joined

  • Last visited

  • Medals

Everything posted by WolfK33

  1. Hi all. Game runs fine so far (German version), except TrackIR. My TrackIR 4 is plugged in okay, Software running, all the right lights illuminated,but when I move my head nothing happens. Is there any key I´m maybe missing ? Probably it´s just something dumb on my end... Greets, Wolf
  2. WolfK33

    Can´t get TrackIR to work

    That was it! As I said, something dumb on my end... Works fine now, thanks a lot folks ! Happy Greetings, Wolf
  3. WolfK33

    Force feedback!

    Also same stick same problem. I would love to see any kind of solution, even if its only a "default" return-to-center tension without any FF-effects. So I thought i might take this thread back to the front page. I bet there are more people who own this stick and can´t just afford to buy another one.The more of you write in here the higher the chances somebody comes up with something...
  4. Hmm, he leaves my group now with this command but doesn´t follow his waypoints, he just hovers there... I tried synchronizing his next waypoint with my wp where he leaves me, also with my wp after that one, but he still stays where he is...
  5. WolfK33

    Seb uh-1m

    Hey Folks, I just a some shots of this absolutely incredible bird in another forum : (scroll down a bit to the second post) http://suppressivefire.net/cgibin....pic=449 Does anybody know where I can get this thing ? I searched all known OFP-Sites and did a Google-search, but nothing. Or is it maybe not available to the public for now? Argh, I need this thing ! Please !! Â
  6. Okay, it´s an old thread, but it´s almost the same problem that I have. I have a chopper, let´s call him chop2 that I want to join another chopper (chop1), wich works fine using a join-wp for chop2.(chop2 is then Nr.3 in the "squad") But after a couple of waypoints I want chop2 to split with chop1 and follow his own waypoints. So in the "on activation" field of chop1´s waypoint where I want them to split I put : [chop2] join chop2 . But the command that comes out when I preview it is "3 follow 1",not "3 follow 3" and nothing changes, he´s still under my command. ?!?
  7. WolfK33

    Seb uh-1m

    Ahh ok, I already guessed it´s still in development. Now that I know I can sleep again, I almost went nuts last night looking for that chopper Thanks, Wolf
  8. Hello everybody. Since I upgraded my system from an Athlon 600 to an Athlon 1400 I always get CTD´s in Resistance after a few seconds or minutes of playing. I never had any such problems with my old gear, wich was the same except Mainboard and CPU. I now have: Athlon 1400 A7A266 Mainbord, newest drivers (Ali_i107, including ali agp 1.90) 256 MB SDRam CreativeLabs 3dblaster Geforce 2 MX 32MB DDR (29.42 det.) Soundblaster Live!Player 1024 Virtual Mem on drive D: , where OFP is also installed, set to min.1024, max "the rest" which is about 6 gig Win ME I tried all possible settings with agp 1x to 4x, with all posibble agp aperture sizes up to 256 MB.With some settings I can play a little longer, like 2 minutes, with others i crashes immediately after mission start. Maybe two typical entries form the flashpoint.rpt can help anybody who knows more about computers than I: ===================================================================== == D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE ===================================================================== Exe version: Sat Jun 29 19:23:24 2002 file:   cur_sp world:   noe campaign: battle:  mission:  Exception code: C0000005 ACCESS_VIOLATION Version 1.75 Fault address:  005D09BE 0101CF9BE D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE Prev. code bytes: 48 10 80 F9 7F 74 31 0F BE D1 8B 48 08 8B 71 54 Fault code bytes: 8B 5C 96 3C 85 DB 74 20 80 78 12 02 75 1A 85 C9 Registers: EAX:165C3270 EBX:1351C430 ECX:13532900 EDX:00000002 ESI:BF15E5FA EDI:00000034 CS:EIP:018705D09BE SS:ESP:018F:009FF8C8  EBP:102A1B24 DS:018F  ES:018F  FS:0BDF  GS:0000 Flags:00010293 ======================================================= ===================================================================== == D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE ===================================================================== Exe version: Sat Jun 29 19:23:24 2002 file:   cur_sp world:   noe campaign: battle:  mission:  Exception code: C0000005 ACCESS_VIOLATION Version 1.75 Fault address:  005E89C0 0101E79C0 D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE Prev. code bytes: 36 01 00 00 0F 94 C0 C3 EB 09 3B 4C 24 04 74 0C Fault code bytes: 8B 49 1C 85 C9 75 F3 32 C0 C2 04 00 B0 01 EB F9 Registers: EAX:10252200 EBX:16A99050 ECX:20113011 EDX:3E554400 ESI:10539C28 EDI:006FAC70 CS:EIP:018705E89C0 SS:ESP:018F:009FF5B8  EBP:009FF694 DS:018F  ES:018F  FS:0B87  GS:0000 Flags:00010206 ======================================================= I hope somebody can help. If there´s anything else you have to know tell me please. The funny thing is, I just bought the new gear to be able to play OFP better, now I can´t play at all...  EDIT: I didn´t put those smilies in that flashpoint.rpt stuff, don´t know how to get rid of them...
  9. WolfK33

    Resistance: ctd since system-upgrade

    Hmm, think I´m gonna do that,thanks, but not before next month Any suggestions on the AGP-settings? Thats one bios item I don´t know very much about. Right now I use AGP 4x and AGP Aperture Size 128 MB...
  10. WolfK33

    Targetting

    Hmm, I don´t know anything about mission editing, but as nobody else answers maybe this helps: I heard about a "knowsabout" command, like " ´sniper1´ knowsabout ´ruskieonthestreet´ ", maybe if you find more information about that command in a command reference this may help you. greetings, Wolf
  11. WolfK33

    Resistance: ctd since system-upgrade

    Reporting: Problem solved ! The problem was that I´m a stupid idiot and therefore used my old PC 100 ( !! ) ram with the new gear. I bought 256 MB DDR today and everything runs fine.Maybe a little choppy but without crashing, and I think I maybe can get rid of the choppiness by expermenting a little with AGP aperture settings and stuff or just live with it. Boonie Rat, when your tip came I already did the reinstall, so I didn´t try that, but thank you. I think I´ll still do the bios-update, but I think for now its "Never touch a running system"... So thank´s a lot for the help, guys! Keep your heads down out there   Greetings, Wolf
  12. WolfK33

    Resistance: ctd since system-upgrade

    Hmm, the Bios is one thing I didn´t think about at all.Maybe because it´s a "new" board...But who knows for how long that thing was getting dusty in that shop, because my version is 1004. So if you use 1011 and are fine with it I think I´m gonna update it tomorrow, although that´s one thing I´m always a little "afraid" of...As I said, I´m not THAT firm with computers.. What I´m gonna do now is "swap" my harddrives (had the small old 2gig as c: with just windows on it and a 13,6gig as d: with games and stuff), and install WinME on the big one, now as "c:", so I can let Windows handle the virtual mem and still have a lot of it, and use the small one as a storage place for "stuff". I think I should´ve done this a long time ago. Oh, and with this install I´m only gonna use ali_agp 1.90, not the ide stuff , at least for testing. I´m gonna report how it works out,and tx for the help again.
  13. WolfK33

    Resistance: ctd since system-upgrade

    Ah finally somebody No, just that one CD-Rom drive. And I upgraded the System after getting Resistance.I could play it without problems with the old gear, well just a little slow and choppy from time to time, that´s why I got the new board and CPU. All the other components are the same I used before. And thanks for answering !
  14. WolfK33

    Resistance: ctd since system-upgrade

    Hmm, nobody ? In the meantime I did another format c: and reinstall of WinMe, installed OFP, GoldUpgrade and Resistance from scratch, let Windows handle the VirtualMem, handled it "myself" again, took out my soundcard completely, let Resistance run with minimum settings on everything, like 320*200*16 lowest viewdistance etc (looks funny ) , put in another graphicscard (GF2MX from Asus), and because there was nothing more to upgrade "downgraded" DirectX from 8.1 to 8.0 from the Resistance-CD using DXBuster and a Reg-Cleaner and used older graphicscard drivers. And still absolutely no success. The same problem persists.
  15. WolfK33

    New island - ia trang valley

    Incredible Work, SelectThis ! After reading several books about the topic just flying a huey around over the empty island without any other units gave me goosebumps ! I hope somebody will make a "Chickenhawk"-Campaign ! So, thanks for the Island ! Wolf
  16. Hi all. When I click "New" in the main Multiplayer screen to create a game, both Lan and online, I get the usual black screen with "creating client", but after that I´m back at the main Multiplayer screen. I don´t have any problems joining a game, nor had I problems hosting one with the "old" OFP. My gear: Athlon 600 (hopefully 1400 soon... ) 256 MB GF2MX 32MB DDR SB Live! Player 1024 ADSL No unofficial Addons in the Resistance-Folder, and removed those from the old OFP-folders, without success. I hope somebody can help me ?! Wolf
  17. WolfK33

    Resistance:can´t host mp games

    Hmm, no firewall, and both Direct Play and Sockets equally don´t work. Didn´t change anything with the port, but that shouldn´t stop me from even getting to the first screen for creating a game.I wanna play on my machine too, not trying to do a dedicated host. Unfortunately I don´t know what DMZ means, and I suppose you don´t mean DeMilitarized Zone...
  18. WolfK33

    Resistance:can´t host mp games

    Yes, I hope so,too, thank you Forgot to mention, I´m running Win ME.
  19. WolfK33

    Ages

    25, Paramedic, ex-Luftwaffe
  20. Hi Stiff, thanks a lot for the fast answer! I think now I understand better! Your English is fine, I think the problem was with my English and the time of day I will download and try it as soon as I wake up tomorrow (my free day...) !!! Sounds really great!
  21. WolfK33

    O.t.w andy release m249!

    I downloaded the full campaign-pack too. It really rocks and the models and weapons and the weapon sounds are just great! (Btw. you can stop that muzzle-flash thingie by deactivating HW T&L, didn´t even do anything to the framerate at my pc..) @ ZuluXray: Are you maybe one of the developers of this campaign? Because I have a problem: I can´t play any further than mission Z002 of the campaign because there´s an addon missing in the "full pack" I downloaded, it´s "rocOicw".So, if you are part of that campaign-team and not just reported the news here could you please tell me where and how to get it or E-mail it to me? Because I don´t understand a word of that campaign-homepage My E-mail address is: wolf-kaiser@gmx.de Keep up the good work, if you did those weapons without Oxygen you should ask BIS if they give it to you, you could do incredible things I believe !
  22. I took a look at the site, and what I saw looked quite interesting. But I don´t understand all of it (didn´t try it so far): Just one question: Did you make a kind of strategy-game that you play like in map-view completely ? Or is it kind of a dynamic-campaign-in-one-mission ? Sorry if this is a stupid question but it is late and I had a hard week...
  23. WolfK33

    You know you have been paying too much ofp when...

    </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (LordZach @ April 08 2002,12:36)</td></tr><tr><td id="QUOTE">lol i bet the people who called you were happy about that <span id='postcolor'> Lol ! I didn´t order him just "forward" but "fast", wich made up for the little delay
  24. WolfK33

    You know you have been paying too much ofp when...

    Well, I´m a Paramedic and had the night-shift two weeks ago. I was sound asleep when in the middle of the night the alarm went off.Both my collegue and I didn´t know the street where we had to go, so I had to look it up on the map.Only when my collegue who was driving asked me a bit angrily what was taking me so long I realized that in my sleepiness I had somehow tried to "click" on the coordinates on the map to tell him where to go..., no shit... But he understood, as he plays OFP too and we have Lan-games from time to time...
×