BlackDeath 0 Posted March 19, 2002 im trying to make it so my squad starts out in a uh60 and goes to shore, then we get out and parachute to the ground, but how do i make it so we start out in the uh60? Share this post Link to post Share on other sites
Stulios 0 Posted March 19, 2002 Put this moveincargo helo1 in the units init field. Replace helo1 with the name of your helocopter. But don't group the units with the helocopter or the pilots will also eject when you command your troops to. Also make sure the helocopter is high enough by putting helo1 flyinhieght 50 in one of its waypoints. i find this gives me plenty of room to eject and the parachute open safely. The 50 can be any height you like, but too low and the units will hit the floor before the parachutes have opened properly. Share this post Link to post Share on other sites
BlackDeath 0 Posted March 19, 2002 i tried putting 'this moveincargo UH60-MG' and 'this moveincargo UH60' but both of them didnt seem to work, and i did the command for every unit Share this post Link to post Share on other sites
Bart.Jan 0 Posted March 19, 2002 Or you can use this command : "_x moveincargo heli" foreach (units group this) (write this into your sqad commander's init line) where heli is name of your UH60. You need name for your helicopter. Share this post Link to post Share on other sites
