Via chipsets and soundblaster (read last sentence)

[Rowdy 1]

Category:

Sound

Question:

I am having trouble with a system using a VIA chipset including a 686b southbridge and a Creative Sound Blaster Live card.

Answer:

When the 686b southbridge was first released, motherboard manufacturers and VIA discovered a problem when trying to transfer files between the primary and the secondary IDE channels on motherboards using ultra-DMA, when a Sound Blaster Live was plugged in and drivers activated. This issue was caused because too much noise is transferred across the PCI bus by the Sound Blaster Live driver set. In an attempt to fix this issue, some motherboard manufacturers modified their BIOS. In some instances, these modifications to the BIOS caused a data corruption error even when not using a Sound Blaster Live. VIA released a patch which resolves this issue, which is incoroporated in the 4in1 drivers from the 4.31 version onwards. Motherboard manufacturers were advised to change the modifications made to thier BIOS to elimate the data corruption issue. If you are experiencing data corruption or lock up when transferring files between two IDE drives: 1) Make sure you have the latest BIOS from your motherboard manufacturer. 2) Make sure you have the latest 4in1 drivers 3) Make sure when you set up your system that you install the 4in1 drivers both before and after you install the SBL to make sure that the drivers see your SBL and install the correct patch. The patch will only install if the SBL is installed

[theavonlady 2]

BIS, you should update your VIA FAQ item with this detailed information.

Sickening, isn't it?