Jump to content

dadax

Member
  • Content Count

    30
  • Joined

  • Last visited

  • Medals

Everything posted by dadax

  1. Thx for the advice to @Groove_C Followed the following steps: 1 Lowered CPU Voltage 1.34V 2 Did some RAM tuning (see bleow - not all is done) 3 Used the new malloc will continue during the holidays...
  2. New result just in for ARMA 3 YAAB: 128.0 FPS with 4.2 Ghz Cache/Ring as it is called by MSI instead of 2.9 Default value. Rest almost like above 8 P-Cores HT off, NO E-Cores enabled. From another Forum I learned Cache/Ring Frequency is tied to the E-cores, if you don't disable the E-Cores you cannot overclock the Cache frequency well. Minor Adjustments with MSI Dragon Ball 1.0.0.08. Did seven standard Runs as a requested by GrooveC (those were at. 2.9 Ghz Cache/Ring, EDIT: and I found that I somehow left G-Sync on for those last seven benchmark runs before, but as well as the cache increase I turned it off for the last one) The picture is a little bit off/blurry because I run A3 for benchmarks in 1920x1080 on a 3440x1440. @Valken you are right I mixed up P=Performance Cores with E=Efficiency Cores in my previous post.
  3. P.S.: Do you need to see a photography of my benchtable?😀 I guess this record will be taken by someone who benches with DDR4 in Dual Rank not like I did with 2x8 GBsingle rank modules , but my 2x16GB Dual rank Kit sadly only runs at GEAR2 at 4 GHz. Any advice on that?
  4. Next result with my 12900K: 127.3 FPS 8 Performance cores at almost 5.4 Ghz (From CPU-Z: Core Speed 5386.8 MHz), HT off, 0 Efficiency Cores. Arma3 2.06 doesn t like E Cores yet. They are negative for Performance also in W11. MSI MAG Z690 Tomahawk WiFi DDR4 3060Ti G.Skill Ripjaws 4000 CL 14 2x8 in Gear 1 (but only Single Rank ) CL 14 Gear 1 From CPU-Z: Memory Type DDR4 Memory Size 16 GBytes Channels Dual Memory Frequency 2061.7 MHz (1:31) CAS# latency (CL) 14.0 RAS# to CAS# delay (tRCD) 15 RAS# Precharge (tRP) 15 Cycle Time (tRAS) 35 Bank Cycle Time (tRC) 50 Row Refresh Cycle Time (tRFC) 724 Command Rate (CR) 1T Uncore Frequency 4688.5 MHz Memory Controller Frequency 2061.7 MHz Host Bridge 0x4660 Cooler: NH-D15 W11 Pro - Clean Install V-Sync and G-Sync: OFF YAAB 1.02 Memory allocator CMA AVX1, Huge pages enabled Full Screen Mode (1920x1080 on a 3440x1440, what a low res, but for benching it s okay)
  5. First! the system still very unoptimised but here we go; 124.0 FPS on 12900K @5.4 Gz 6 E-Cores 0 P Cores 1920x1080 S - Standard Settings in YAAB
×