Kaede Takagaki

Hi all, May I ask for how to create new runways for aircraft on map ? Some excellent terrains with airfields but without the runway markers and it causing AI cannot take off and land so how could I add the runway for them ? All ideas are welcome, thanks in advance.

Hi all: I have played ARMA3 for 7200 hrs but often confused in lagging problem. I used to play with the Dell Inspiron laptop of CPU : i7-7700 HQ, 16GB MEM and GTX-1050TI GPU. The game performance usually around 40 FPS , over 50 AI might decrease to 30 FPS. Yesterday I changed a new laptop into Dell Alienware A51M-R2 with CPU:I7-10700K, 16GB MEM and RTX-2070 SUPER GPU I considering the device might able to solve the problem , what I hope is all videos settings in medium or high , 60 AI Battle keep stable around 60FPS. However, if enter the editor did nothing just watch trees (SAMPLING: 100, TEXTURE: very high, OBJECTS: Standard , TERRAIN: Low, SHADOW: Disabled, PATICLES: Low, COULD: very high, PIP: Low. OVERALL: 1268 OBJECT :830) FPS is around 38, to the sea it up to 60-71. 40 AI bots battle FPS around 28-33. 6V6 tank/APC battle round 26-33 FPS. I CAANOT accept a device much advanced than my past performance worse than the old laptop.....I tried whole night couldn`t figure it out. May I ask where is the problem????? How can I set each of options in launcher and videos settings and others to increase the FPS?? Thanks so much.

Thank you for all 🙂 The problem has been solved. At first ARMA3 running with the intergrated graphics and the RTX 2070S haven`t get activated ...so it came 30 fps. After changed into RTX-2070S , game running with highest 185 FPS and 150 AI battle keep staying around 100-120 FPS. Cheers.

Hi all: Recently I found lots of amazing maps with a problem of airfields without the runway grid so it cause AI plane cannot take off or land. I consider to force AI take off by increasing its speed and I tried : this forceSpeed -1; However, nothing happened.I think it’s might be not relative to speed but the engine running degree，if AI plane keep engine running in maximum it will able to take off. so how could I force AI turn on engine staying in maximum? Thank you

Thank you for all: The problem has been solved by using function : _launch = [_VEHICLE, "HE(OR CBU/5kt to choose different warhead)", 20, [TARGET MAP GRID(E.G.1234,4321,0)]] spawn pook_ARTY_FNC_SRBMMISSION; example: _launch = [a1, "HE", 20, [2345,7653,0]] spawn pook_ARTY_FNC_SRBMMISSION; P.S. For unknow reason , missile will be fired until waiting more than 4min 40s after missile raised:(

Hi all: I am trying let AI firing missiles by using vehicles from Pook ARTY PACK via script. However, there some problems need help... I placed a 9k720 iskander and named a1 and the target vehicle in range(Where I tried able to attack with artillery computer by hand testing) called t1 Then placed a trigger with content : [a1,'PREP'] execVM '\pook_ARTY_c\scripts\SRBM.sqf'; [a1,'HE'] execVM '\pook_ARTY_c\scripts\SRBM.sqf'; which let 9k720 prepare for launch and choose HE warhead. Also I tried using waypoint but not working well, the warhead cannot be chosen. After that placed the other trigger with content: a1 doArtilleryFire [getPos t1,"pook_9k720_1Rnd_HE",1]; However, nothing happened . I tired the same script on other artillery vehicles not from pook ARTY and it`s work ... I consider it might be the problem of wrong magazine classname ,so I tried pook_9k720_1rnd_Base, but also not work. I have no idea about it could anyone help me check out where is the problem....many thanks.

Thank you mate. yes it is the normal artillery i think , the firing option is same to other artillery units. I tired place an iskander with prepared and warhead armed in my group , then I click a point on map request AI artillery support and AI fried the missile, also the options in command menu is no difference from the ordinary artillery units. I will go their .bpo file to seeking scripts:)

Hi All: I am facing trouble that RHS infantry paradrop waypoint causing much stress to my CPU In unknown reasons and finally the game quit with the error of 0x0000005. So I decided to let AI paradropped by script: Currently , this what I using(the plane named as T1) 0 = [ ] spawn {{unassignVehicle _x; _x action [“Eject”, T1];} forEach (assignedCargo T1);} AIs able to jump out and no errors happened again, however the space between each AI seems so large and it made the paradrop line so long.... I notice that if the plane suffers damage in some degree, ALL crew and passengers will jump out the plane in same time so I wonder that script might working on improving my paradrop, but I am not sure how to write that script, could anyone provide some ideas? Thanks.

Hi all: I am getting trouble in find out how to lower the front ramp of the Type 072 LST from CUP Vehicles DEV. Same to all CUP Static ship , there has nothing in the AnimateSource and UserAction. However, during check the config viewers, I ‘ve find that the ship has into few parts like : CUP_Type072_Main (come first) CUP_Type072_Front, CUP_Type073_Rear, ..etc Then , I find both animateSources and UserActions in CUP_Type072_Front. Which called : ramp_4_source ramp_front_source then I tried scripts: this animateSource [“ramp_4_source”,1]; this animateSource [“ramp_front_source”,1]; However , they are not work 😞 And the same thing to scripts from userActions . The problem might be the ship placed is a whole object but the scripts are from parts and it cause the scripts cannot work.... Anyone could help me figure it out...I really need it in my mission (I know I can directly down the ramp from options in attributes, but I need the lowing process ...) All ideas are welcome, thanks in advance.

Hi all May I ask for a script able to open the rear gate of CUP LHD in editor ? I tried seek class name in config viewer however the LHD has no animateSource and UserActions ... Now I am confusing how to work it out , any ideas? Thanks in advance.

Thank you so much! It finally worked after few changes:) I don’t know why it wasn’t work if directly copy your script format , if insets it into an object will shown error “init: “. I made few little changes and let it into this : _Vehs = nearestObjects [lhd,[],100]; { _x animate ["door_welldeck",1];_x animate ["door_welldeck_2",1];_x animate ["door_welldeck_3",1]; } forEach _Vehs; and then It worked well.The changes are only change “nearestobjects” into “nearestObjects” and then put all _X animate stay closer with brackets . You help me solved a really large problem, I am really appreciate, thanks again.

Thanks for help, however sadly it’s not work to me.... From the class name , seems they made LHD into different parts and finally combined all these parts together and it cause us can’t select the right part which welldeck locating so our scripts not work (I guess) I also tried Something like : player action [“Open_Well_Deck“,player]; it still not working, but I think I might work if we know the correct action classname.

Hi All: I am now fixing the hit point of a tank because it has too low HP to keep living , even though a M2 machine gun able to destroy it after shot 10 seconds ...XD But I am confusing in find out the file which contain the scripts for vehicle’s HP in the .bpo file. It’s the first time I made changes about vehicle’s HP . So could anyone experienced teaching me what the file name ending regularly looks like in .bpo? And what type of script usually working on it ? Thanks a lot.

hi all I`ve got a problem that after enhance the courage of AI to max then during battle it was usually seen that team members stay in position and firing the enemy however , the team leader break the formation left all members rush ahead to very close distance to enemy then firing , finally be killed. I tried set AI attribute and waypoints attribute let them stay in formation in any time but it`s not work...the leader still rush to enemy during battle . I don`t want my team lost their leader from the first ..XD How could I fix it ? Thanks

Hi all , I am now working on changing of texture of weapons , I wish add flags on my gun but after I open the texture I cannot find the part where I wish to make the change by the reason of the main color of the gun is fully black. Also I tried to open it with 3D mode to find that part but the oxygen 2 happened an error. how can I find that where that part is ? thanks.

Thanks a lot , I am now practicing this method 🙂

hi : Just got problem is script weapon firing , for the situation of AI Bombers never drop bombs I used to let bombs dropped by FireAtTarget script , however, each time only I bombs dropped , so I if I want the bomber able to drop more bombs in one time how can I make it ? Then still a problem in Ai behaviour , I found there are only 2 mode of AI behaviour in ARMA3 only firing and moving , but how can I scripting AI moving with firing their weapon ? Tanks sometimes able to do it , but the infantry units only keep moving if enemy clear or get covered ,what effect I want is AI rush to enemy with guns firing enemy . Any ideas ? Thanks a lot.

Hi all: Maybe everyone have complained about AI aim is too accurate, but I got a opposite problem. It’s usually happened in my mission,AI has poor aim performance in mid range , like 2 squad shot each other I see them used more than 6 mags then may able to kill one of the enemy.....so I wonder is any scripts able to make it’s must be hit targets during the complex shot time(like among each 10 shots must contain one time shot able to on target) Then still any way able to let AI fire the weapon and also keep moving but not stand or lay down?(like AI move forward and firing in same time) Thanks for help.

Thanks for help Play3r :)

Hi all, I just wonder are there any ways able to Change the transport space of vehicles? For example, there are lots of huge VIV cargo planes inAA3, I wish them able to contain APCs and MBTs but no one able to do that by lack of space ... Any ideas to solve ? Thanks!

Hi guys I got some problems, Is there any way to call land crops as support units just like the showcase,if I need help I can call them from command menu and them will move to my location. Then ,the second problem,is there any scripts which effectively let plane drop bombs? In fact, I use DAS air support mod for long time but after the last update this mod sometimes not work ,planes only able to drop LGBs to target highlighted by laser and still only with a single bomb,I just wonder some ways able let plane drop more bombs in once time. Thanks

Same with you..... This error code happened on my game about every an hour.....

Nice mod I have used it for long time at steam site, Your type 90 tank is the only one able to defeat T-140 if there is a 2 vs 2 tank competition, great. Excited to see you are still keep updated this mod , I have mentioned in steam hope to AH-64 for JGSDF and you make it thanks a lot! I looking forward to there will be type 10( I have one but it not performance well.....),type 74 MBT and type 87 anti-air guntank. I really want to help you to reduce your pressure and updated this mod together and I also have lots of time to do it. However , by the reason of I cannot understand some steps of mod make and I have tired to learn about it but field... :( I will always keep an eye on this mod and try to learnt mod make again.

I just try make the rescue mission. AI team should go cross from a firing field and when they cross it successfully at the end there will be trigger let a helicopter come to pick them up. However , 2 problems, first one if AI feel the exist of enemy they all stay low or lay on the ground then get fire to enemy all stay here only all enemy are killed and then moving again...( I cannot set the careless behaviour by the reason of if like that AI moving speed will decrease and then be killed....) the second one if the helicopter arrive at the position ( I have put the helipad here), let the helicopter use the waypoint join and lead and get in, yes , helicopter land successfully but all AI keep firing to enemy if not clear them will not take on the helicopter, also still a situation is helicopter fly away to another positon to land but not my helipad...

I’ve just got the answer,it will be blank if only enter the UserActions folder,and then it must input the word like “rear”,”ramp”,”cargo”etc. from the keyboard and after that the option will be appeared :)