A-10 Flight Model Improvement Demonstrator

[kueppcera 0]

Great work! Although imho the old flightmodel wasn't that crappy .... after trying this one imust say: i'd like to have all planes fly this smooth and controlable!!

A really great improvement!

I love it!

[layne_suhr 0]

To make an replacement what do i do??? Do i just copy the config into the BIS A-10 folder???

P.S Sorry about digging up and old post

[dob 0]

it's great

[.kju 3244]

@layne_suhr

1) Unpack rksl-a10 pbo with cpob.

2) Open config.cpp

3) Change config line:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class A10: Plane {}

class rksl-a10: A10

to

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class A10: Plane

4) pbo file again with RMB on the 'rksl-a10' folder - create PBO.

[layne_suhr 0]

@layne_suhr

1) Unpack rksl-a10 pbo with cpob.

2) Open config.cpp

3) Change config line:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class A10: Plane {}

class rksl-a10: A10

to

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class A10: Plane

4) pbo file again with RMB on the 'rksl-a10' folder - create PBO.

Thanks Q doing it right now

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> class A10: Plane

scope = public;

displayName = "A-10 (Improved FM)";

model = "\rksl-a10\rksl_A10.p3d";

aileronSensitivity = 1; // relative aileron sensitivity

elevatorSensitivity = 0.8; // relative elevator sensitivity

envelope[] = {0.0, 0.5, 1.0, 2.6, 4.9, 5.9, 6.9, 6.5, 6.4, 5.8, 5.6, 1.8, 0};

[layne_suhr 0]

Unless i have gotten the coding wrong it didn't work.. It didn't replace the default A-10 Flight Model

[khayes 0]

at first sight, it may be caused by missing brackets in your code :

Quote[/b] ] class A10: Plane {

scope = public;

displayName = "A-10 (Improved FM)";

model = "\rksl-a10\rksl_A10.p3d";

aileronSensitivity = 1; // relative aileron sensitivity

elevatorSensitivity = 0.8; // relative elevator sensitivity

envelope[] = {0.0, 0.5, 1.0, 2.6, 4.9, 5.9, 6.9, 6.5, 6.4, 5.8, 5.6, 1.8, 0};

};

[layne_suhr 0]

at first sight, it may be caused by missing brackets in your code :

Quote[/b] ] class A10: Plane {

scope = public;

displayName = "A-10 (Improved FM)";

model = "\rksl-a10\rksl_A10.p3d";

aileronSensitivity = 1; // relative aileron sensitivity

elevatorSensitivity = 0.8; // relative elevator sensitivity

envelope[] = {0.0, 0.5, 1.0, 2.6, 4.9, 5.9, 6.9, 6.5, 6.4, 5.8, 5.6, 1.8, 0};

};

Thanks i will test in a sec... How do i transfer the CPP file back to BIN file??? I only have cPBO, unraP and WinRAR

[Guest RKSL-Rock]

Swap this for the envelope setup in the Config.cpp.  This brings the stall speed closer to that of the stock BIS A-10.  It also tones down the acceleration in most flight regimes but its still remains a more positive feel.

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> envelope[]=

{

// speed relative to max. speed -> lift (G)

//REF - 0.0  0.1  0.2  0.3  0.4  0.5  0.6  0.7  0.8  0.9  1.0  1.1 // rel. speed

//BIS - 0.0, 0.1, 0.5, 1.5, 3.1, 4.3, 4.9, 5.0, 4.4, 2.8, 1.6, 0.8, 0};

//RKSL1-0.0, 0.5, 1.0 ,2.6, 4.9, 5.9, 6.9, 6.5, 6.4, 5.8, 5.6, 1.8, 0

0.0,0.1,0.65,2.2,3.7,5.3,6.0,5.5,5.6,4.8,3.6,1.8,0  // lift

};

You may want to use these lift figures.  They bring the stall speed back into line withthe proper stall speed etc.

Thanks i will test in a sec... How do i transfer the CPP file back to BIN file??? I only have cPBO, unraP and WinRAR

You dont need to.  Just delete the config.bin and save the new config as config.cpp

[layne_suhr 0]

Swap this for the envelope setup in the Config.cpp. This brings the stall speed closer to that of the stock BIS A-10. It also tones down the acceleration in most flight regimes but its still remains a more positive feel.

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> envelope[]=

{

// speed relative to max. speed -> lift (G)

//REF - 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 // rel. speed

//BIS - 0.0, 0.1, 0.5, 1.5, 3.1, 4.3, 4.9, 5.0, 4.4, 2.8, 1.6, 0.8, 0};

//RKSL1-0.0, 0.5, 1.0 ,2.6, 4.9, 5.9, 6.9, 6.5, 6.4, 5.8, 5.6, 1.8, 0

0.0,0.1,0.65,2.2,3.7,5.3,6.0,5.5,5.6,4.8,3.6,1.8,0 // lift

};

You may want to use these lift figures. They bring the stall speed back into line withthe proper stall speed etc.

Thanks i will test in a sec... How do i transfer the CPP file back to BIN file??? I only have cPBO, unraP and WinRAR

You dont need to. Just delete the config.bin and save the new config as config.cpp

Ok thanks RockofSL

Will change those values

Where do i put those values in the config???

[Guest RKSL-Rock]

Where do i put those values in the config???

Just copy and paste the code sample in my post over the existing envelope definition.

[layne_suhr 0]

Ok thank you RockofSl was just confused because it says BIS RKSl1 and REL and was wondering if i copied one or all or something but thanx for clearing it up