seminara 4 Posted January 17, 2005 Have you tried to add  -nomap to your OFP shortcut for that mod ?Because grey screens are talked about in this thread Yes thanks, and I've tried running it as a MOD and by temporarily replacing the bin folder in the RES folder. I do get into OFP and see the main selection screen and I can play via normal Resistance mode or via my Y2K3 Mod. It only goes grey after I've clicked on a mission title. It seems like a addon conflict perhaps?? I get the following message at start up but I doubt it's meaningful: No entry 'config.bin/CfgWeapons.garand' Also - can you tell me what's the file name for the tracer addon? If I read correctly this may be causing conflicts? Finally, in that link you suggested they talk about changing the AGP aperture to be 128mb at the highest and maybe as low as 64mb. How do you change this and will it effect things like Photoshop? I've just installed an XFX GF6800 Ultra 256MB graphics card so I'm not sure what that beast requires. Thanks and sorry to be long winded! Share this post Link to post Share on other sites
seminara 4 Posted January 17, 2005 I'm uploading a Complete pack with all addons needed , working config ...etc   I'll need 2 hours , maybe 3 or 4... ps: I've done new replacements  Thank you all , thanks a lot and excuse me for all mistakes that occur on the thread Sounds Great Thunderbird. If there are any PBO files that are known to cause conflicts and need to be deleted, could you please state that in a ReadMe file? Thanks! Share this post Link to post Share on other sites
Reppyboyo 0 Posted January 17, 2005 I'm uploading a Complete pack with all addons needed , working config ...etc I'll need 2 hours , maybe 3 or 4... ps: I've done new replacements Thank you all , thanks a lot and excuse me for all mistakes that occur on the thread Woooo nice one Share this post Link to post Share on other sites
sanctuary 19 Posted January 17, 2005 Yes thanks, and I've tried running it as a MOD and by temporarily replacing the bin folder in the RES folder.I do get into OFP and see the main selection screen and I can play via normal Resistance mode or via my Y2K3 Mod. It only goes grey after I've clicked on a mission title. It seems like a addon conflict perhaps?? I get the following message at start up but I doubt it's meaningful: No entry 'config.bin/CfgWeapons.garand' Also - can you tell me what's the file name for the tracer addon? If I read correctly this may be causing conflicts? Finally, in that link you suggested they talk about changing the AGP aperture to be 128mb at the highest and maybe as low as 64mb. How do you change this and will it effect things like Photoshop? I've just installed an XFX GF6800 Ultra 256MB graphics card so I'm not sure what that beast requires. Thanks and sorry to be long winded! Well, if other mods like Y2K3 works without problems for you and you have tried -nomap for this one , i advice not to change the aperture size (following the good old saying "when something work do not break it" ) as i highly doubt it will solve your problem, noticing several users have problems. Maybe there is an addon making a conflict with another or there is a missing one, but as i don't play this mod i can't test. Unfortunately i have no idea about the tracer mod name , but i guess it is the one from ]this thread if you need the pbo name. Share this post Link to post Share on other sites
the_shadow 0 Posted January 17, 2005 um, dont know exatly how to put this but.... sometimes i get a CTD and a error message that says "missing texture" i dont know what causes this, might not even be this mod, but it sure looks as it as it doesnt really matter what other addon i use beside the replacement pack. most common though is when i quickley turn around and i have a truck or a bushranger (or whatever the name is) Huey close by.... might be some lod that causes it. Share this post Link to post Share on other sites
seminara 4 Posted January 17, 2005 Well, if other mods like Y2K3 works without problems for you and you have tried -nomap for this one , i advice not to change the aperture size (following the good old saying "when something work do not break it" ) as i highly doubt it will solve your problem, noticing several users have problems. OK, many thanks anyway Sanctuary Share this post Link to post Share on other sites
Thunderbird 0 Posted January 18, 2005 Update Check the first post *Get the complete pack in the first post I hope that you'll have no bugs or CTD I've updated the Misc pack too *Please read carefully the read me Share this post Link to post Share on other sites
R0adki11 3949 Posted January 18, 2005 very nice, downloading now, idea for my low spec pc Share this post Link to post Share on other sites
QBA69 1 Posted January 18, 2005 Hi, WOW - over 200 MB to dowload in a single file?! And what about all the modem users - please do not forget about them. Releasing this mod in a separate files - as you used to do before - would be a nice thing - then more people could install this great mod in its final version. Hope I'm not the only one here ;) Cheers, voodzia Share this post Link to post Share on other sites
Reppyboyo 0 Posted January 18, 2005 Link is not working Anyone got a BitTorrent tracker handy? Share this post Link to post Share on other sites
seminara 4 Posted January 18, 2005 I think the whole point in having one file is that it made life easier? Â Even on a modem, I personally prefer the one file option. Â Thanks again Thunderbird. Share this post Link to post Share on other sites
seminara 4 Posted January 18, 2005 OK, I'm about to attempt this again - now that I've Norton Ghost'd back to my previous disk image. Â I'd like to clarify one last issue before proceeding: With these addons, can I simply create a seperate FLASHFX MOD folder or do I 'need' to create different BIN, ADDON and DTA folders in the RES folder? I would honestly prefer the MOD folder option as messing with the RES folder opens up loads of possibilities for major heartache! Cheers Share this post Link to post Share on other sites
Totala 0 Posted January 18, 2005 Unfortunately, the link you have clicked is not available Share this post Link to post Share on other sites
QBA69 1 Posted January 18, 2005 OK, I'm about to attempt this again - now that I've Norton Ghost'd back to my previous disk image. I'd like to clarify one last issue before proceeding:With these addons, can I simply create a seperate FLASHFX MOD folder or do I 'need' to create different BIN, ADDON and DTA folders in the RES folder? Hi, To install this mod as a mod ;) - I mean in a separate dir you have to create a new folder (I called it ffmu) and then create these 3 dirs in there: 1. bin (config.bin goes there) 2. addons (all requiered addons go there) 3. dta (anim.pbo goes there) And that all. It works just great for me. Have fun! voodzia Share this post Link to post Share on other sites
seminara 4 Posted January 18, 2005 Great, thanks for the clarification! Share this post Link to post Share on other sites
QBA69 1 Posted January 18, 2005 Great, thanks for the clarification! You're welcome. And don't forget to add "-mod=ffmu" to your OFP desktop shorcut command/target statement line (or just place a semicolon after the one you already have there e.g. "D:\OFP\FLASHPOINTRESISTANCE.EXE -nosplash -nomap -mod=bas;ffmu") Cheers, voodzia Share this post Link to post Share on other sites
action man 0 Posted January 18, 2005 Why not use a mod launcher? i use kegs,it's brill!! Share this post Link to post Share on other sites
Totala 0 Posted January 18, 2005 The good point is that I don't have anymore troubles installing FFX-UR ... the reason is that the link is broken  Could anyone post a link for a complete and fully working pack ? Share this post Link to post Share on other sites
seminara 4 Posted January 18, 2005 Why not use a mod launcher? i use kegs,it's brill!! Sounds like a good idea...never heard of a MOD launcher. Do u have a link for it by any chance? Share this post Link to post Share on other sites
Thunderbird 0 Posted January 18, 2005 I don' t understand why the link is brocken I'll upload it again Sorry all Share this post Link to post Share on other sites
Thunderbird 0 Posted January 18, 2005 @Voodzia , don't worry man , I'll do something for you Edit : please can somebody help me to find a good ftp , and free to can put it ? Share this post Link to post Share on other sites
eric51 0 Posted January 18, 2005 thunderbird i want just to say "merci pour tout" Share this post Link to post Share on other sites
Thunderbird 0 Posted January 18, 2005 Sorry , I can't host 200 mb , it's impossible , I must put addons list like before ... SORRY But if somebody can help me to host it , it'll be perfect Share this post Link to post Share on other sites
QBA69 1 Posted January 18, 2005 Sounds like a good idea...never heard of a MOD launcher. Do u have a link for it by any chance? You wanted it you got it ;) http://koti.mbnet.fi/kegetys/flashpoint/launcher218.zip Cheers, voodzia Share this post Link to post Share on other sites
