BlackbirdSD 15 Posted August 4, 2020 I start my mission in an open chute using chute = "Steerable_Parachute_F" createVehicle [0,0,0]; chute setPos [getPos this select 0, getPos this select 1, 200]; this moveIndriver chute; Works fine in single player but when I play with a friend, there is an extra chute for each of us. We each are attached to our own and there are 2 more open chutes next to us. I also have a supply drop doing the same thing, adding an extra chute during multiplayer using this command parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; Any idea how to correct this? Thanks Share this post Link to post Share on other sites
gc8 970 Posted August 4, 2020 You shouldn't have to use createvehicle to give soldier a parachute, the parachute should open automatically if the soldier's backpack is parachute. 3 hours ago, BlackbirdSD said: I also have a supply drop doing the same thing, adding an extra chute during multiplayer using this command where are you executing this code? Share this post Link to post Share on other sites
pierremgi 4739 Posted August 4, 2020 4 hours ago, BlackbirdSD said: I start my mission in an open chute using chute = "Steerable_Parachute_F" createVehicle [0,0,0]; chute setPos [getPos this select 0, getPos this select 1, 200]; this moveIndriver chute; Works fine in single player but when I play with a friend, there is an extra chute for each of us. We each are attached to our own and there are 2 more open chutes next to us. I also have a supply drop doing the same thing, adding an extra chute during multiplayer using this command parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; Any idea how to correct this? Thanks You just have to run the code in initPlayerLocal.sqf , replacing this (works only in init field) by: player So, add the sqf in the root folder of the mission and: private _chute = "B_parachute_02_F" createVehicle [0,0,0]; _chute setposASL (getPosASL player vectorAdd [0,0,200]); player moveInDriver _chute; for your supply drop, you can let it where it runs and : if (isServer) then { parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; }; Share this post Link to post Share on other sites
BlackbirdSD 15 Posted August 4, 2020 14 hours ago, gc8 said: You shouldn't have to use createvehicle to give soldier a parachute, the parachute should open automatically if the soldier's backpack is parachute. where are you executing this code? In the init field of the player. Share this post Link to post Share on other sites
BlackbirdSD 15 Posted August 4, 2020 12 hours ago, pierremgi said: You just have to run the code in initPlayerLocal.sqf , replacing this (works only in init field) by: player So, add the sqf in the root folder of the mission and: private _chute = "B_parachute_02_F" createVehicle [0,0,0]; _chute setposASL (getPosASL player vectorAdd [0,0,200]); player moveInDriver _chute; for your supply drop, you can let it where it runs and : if (isServer) then { parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; }; I will give a try, thanks Share this post Link to post Share on other sites
BlackbirdSD 15 Posted August 4, 2020 13 hours ago, pierremgi said: You just have to run the code in initPlayerLocal.sqf , replacing this (works only in init field) by: player So, add the sqf in the root folder of the mission and: private _chute = "B_parachute_02_F" createVehicle [0,0,0]; _chute setposASL (getPosASL player vectorAdd [0,0,200]); player moveInDriver _chute; for your supply drop, you can let it where it runs and : if (isServer) then { parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; }; Just curious, what caused the second chute? because it was in the init field of the supply drop and the player? Just so I understand more how this stuff works. Thanks Share this post Link to post Share on other sites
pierremgi 4739 Posted August 5, 2020 Yes. At mission start, the init field of any objects in editor runs on server, then on each client while mission starts locally. If all players start at (almost ) the same time, usually the case with 2 friends on hosted server, the code seem to run twice. In fact the server runs the code, then the client also when joining, and you can see 2 chutes. It's the same with the init.sqf commonly used for script automatically run at start. (init.sqf runs on server and clients). So, some unwanted results, like a "reset" for a unit loadout, can be fired from a JIP client. (but that depends on the command/functions also). You need to read some pages about event scripts (and links). If your friend joins a little later, you will see a 2nd chute, spawning with the start of the 2nd player, and probably a little teleportation (due to the setpos at same initial position). With 10 players, ... 10 chutes. Scripting in MP is a large step above scripting skill for SP. You have some great topics and BIKI for learning. You can start here, but there is so much links and things to assimilate... Have fun! 1 Share this post Link to post Share on other sites
BlackbirdSD 15 Posted August 5, 2020 1 hour ago, pierremgi said: Yes. At mission start, the init field of any objects in editor runs on server, then on each client while mission starts locally. If all players start at (almost ) the same time, usually the case with 2 friends on hosted server, the code seem to run twice. In fact the server runs the code, then the client also when joining, and you can see 2 chutes. It's the same with the init.sqf commonly used for script automatically run at start. (init.sqf runs on server and clients). So, some unwanted results, like a "reset" for a unit loadout, can be fired from a JIP client. (but that depends on the command/functions also). You need to read some pages about event scripts (and links). If your friend joins a little later, you will see a 2nd chute, spawning with the start of the 2nd player, and probably a little teleportation (due to the setpos at same initial position). With 10 players, ... 10 chutes. Scripting in MP is a large step above scripting skill for SP. You have some great topics and BIKI for learning. You can start here, but there is so much links and things to assimilate... Have fun! Thank you! Share this post Link to post Share on other sites
BlackbirdSD 15 Posted August 16, 2020 On 8/4/2020 at 2:18 AM, pierremgi said: You just have to run the code in initPlayerLocal.sqf , replacing this (works only in init field) by: player So, add the sqf in the root folder of the mission and: private _chute = "B_parachute_02_F" createVehicle [0,0,0]; _chute setposASL (getPosASL player vectorAdd [0,0,200]); player moveInDriver _chute; for your supply drop, you can let it where it runs and : if (isServer) then { parachute_1 = "B_parachute_02_F" createVehicle [0,0,0]; parachute_1 setPosASL (getPosASL s1); s1 attachTo [parachute_1, [0, 0, 1]]; }; I added this private _chute = "B_parachute_02_F" createVehicle [0,0,0]; _chute setposASL (getPosASL player vectorAdd [0,0,200]); player moveInDriver _chute; To the initPlayerLocal and removed the code from the init field of the player and when I start the mission, I am invisible and i can see the open chute but cant control it. Share this post Link to post Share on other sites
killzone_kid 1326 Posted August 17, 2020 4 hours ago, BlackbirdSD said: "B_parachute_02_F" On 8/4/2020 at 4:38 AM, BlackbirdSD said: "Steerable_Parachute_F" Could be the reason Share this post Link to post Share on other sites