Jump to content
tebbbs

SRU - Persistent Database and Resupply

Recommended Posts

On 28/3/2017 at 11:30 PM, tebbbs said:

 

if it stops saving, its usually because objects have a special char in them (as far as i remember, i might be wrong). If you could tell me how you "work around" this problem, i can see if your solution makes sense and if i implemented

ill post the changes when i get home from work. 

 

 

Share this post


Link to post
Share on other sites

Just checking before I dive into using this since I know the author said he can't work on it till July.. is it working in its current state?

Share this post


Link to post
Share on other sites
fn_server_setUnit.sqf

_Player = _this select 0;
if ((isPlayer _Player) && ((_Player getVariable "loaded") == 1)) then {				\\ <------------- This will allow it to save on next 
	_playerInv = str formatText ["%1", (getUnitLoadout _Player)];				\\ 			passes instead of freezing. 
	_playerPos = format ["%1",(getPosWorld _Player)];
	_playerDir = format ["%1",(round(getDir _Player))];
	_playerUID = getPlayerUID _Player;
	_playerName = format ["%1",(name _Player)];
                                                                                                      
Original file.
                                                                                                      
_Player = _this select 0;
waitUntil {isPlayer _Player};
waitUntil {(_Player getVariable "loaded") == 1};
_playerInv = str formatText ["%1", (getUnitLoadout _Player)];
_playerPos = format ["%1",(getPosWorld _Player)];
_playerDir = format ["%1",(round(getDir _Player))];
_playerUID = getPlayerUID _Player;
_playerName = format ["%1",(name _Player)];

After this change the addon has worked like a charm :)

 

if you keep working on it i have a couple of features, i'll like to request :)

 

 

  • Like 1

Share this post


Link to post
Share on other sites

1. Admin Force Save

 

2. Web interface for Ordering Supplys. (supplyes will be delivered to predefined markers ingame.) % roll on all ordered supplyes based on how fare in advance order is placed. + tonnage            limite

 

3. Ability to save Opfor to db. at admin request.. (in Our missions it will save Zeus a lot of work setting up AI's if objectives isent completet befor mission end.) if possible a admin feature to remove alle Opfor/AI's from db.  (+ waypoints ect if possible.)

 

4. currently you can set Admin in the db.. now how about Officer. with the ability to assign rank to players ingame.

 

 

i proberly have more.. but this was just from the top of my head.. just  give me a heads up if i need to further explaine :)

Share this post


Link to post
Share on other sites

does this currently work with modded items such as vehicles from rhs? I can only get vanilla vehicles to save currently. 

Edited by Olsen, A.

Share this post


Link to post
Share on other sites
On 2/5/2017 at 0:29 AM, Olsen, A. said:

does this currently work with modded items such as vehicles from rhs? I can only get vanilla vehicles to save currently. 

 

Im not at my pc so cant remember filesnames. But finde the Config file and add rhs classnames to the vehicles_allowed list. 

Share this post


Link to post
Share on other sites
14 hours ago, ConArts said:

 

Im not at my pc so cant remember filesnames. But finde the Config file and add rhs classnames to the vehicles_allowed list. 

will i have to do it for objects like for ace medical

or any item i want persisted

 

Share this post


Link to post
Share on other sites
On ‎06‎-‎05‎-‎2017 at 4:31 AM, Olsen, A. said:

will i have to do it for objects like for ace medical

or any item i want persisted

 

You dont have to do it for ace.. but if you make some custom stuff you might have to.. if you give it a weird classname

Share this post


Link to post
Share on other sites

Question, does this also save all AI units along with player units? If not, how easily would it be accomplished to do so? Thanks.

Share this post


Link to post
Share on other sites
On 4/8/2017 at 11:37 AM, ConArts said:

fn_server_setUnit.sqf

_Player = _this select 0;
if ((isPlayer _Player) && ((_Player getVariable "loaded") == 1)) then {				\\ <------------- This will allow it to save on next 
	_playerInv = str formatText ["%1", (getUnitLoadout _Player)];				\\ 			passes instead of freezing. 
	_playerPos = format ["%1",(getPosWorld _Player)];
	_playerDir = format ["%1",(round(getDir _Player))];
	_playerUID = getPlayerUID _Player;
	_playerName = format ["%1",(name _Player)];
                                                                                                      
Original file.
                                                                                                      
_Player = _this select 0;
waitUntil {isPlayer _Player};
waitUntil {(_Player getVariable "loaded") == 1};
_playerInv = str formatText ["%1", (getUnitLoadout _Player)];
_playerPos = format ["%1",(getPosWorld _Player)];
_playerDir = format ["%1",(round(getDir _Player))];
_playerUID = getPlayerUID _Player;
_playerName = format ["%1",(name _Player)];

After this change the addon has worked like a charm :)

 

if you keep working on it i have a couple of features, i'll like to request :)

 

 

I Tried this, and am now getting 
"17:36:35 Warning Message: Script \sru_pdb\initServer_pdb.sqf not found" 
I didn't get this before..

Share this post


Link to post
Share on other sites
2 hours ago, kennyleif said:

I Tried this, and am now getting 
"17:36:35 Warning Message: Script \sru_pdb\initServer_pdb.sqf not found" 
I didn't get this before..

Sounds obvious but make sure you have the .pbo loaded (usually server side only). You may get this error if you load the mission locally on a client.

Share this post


Link to post
Share on other sites
1 hour ago, [BL] Hannibal said:

Sounds obvious but make sure you have the .pbo loaded (usually server side only). You may get this error if you load the mission locally on a client.

I got it running on the server.

If anyone have a current running version of this, could they please be of assistance, settting it up? Are you using extdb3 or 2?

Share this post


Link to post
Share on other sites
Just now, [BL] Hannibal said:

Using extdb3 but using the pbo linked here: http://tebinulrich.de/pdb.pbo

 

Notice the path is \sru_pdb\ so I think that it is referencing the older one for extdb2

Clicking on the link just gives a lot of text? What do I do with it? And thanks for the help

Share this post


Link to post
Share on other sites

And just to be clear? I replace the sru_pbo with this? And run SRU mod with extdb3 instead of 2?

1 minute ago, [BL] Hannibal said:

Just right click it, save link as pdb.pbo

 

Share this post


Link to post
Share on other sites
10 minutes ago, [BL] Hannibal said:

Just right click it, save link as pdb.pbo

Okay, so now i get this in rpt, after all the other stuff is loaded in: 
21:37:48 Call extension 'extDB3' could not be loaded: %1 is not a valid Win32 application.

Share this post


Link to post
Share on other sites

Just sounds like it hasn't loaded extdb3 correctly (make sure its 'extDB3_x64.dll' is unlocked).

 

 

Make sure also that you add something like this to the "extdb3-conf.ini"

 

[SRU_DB]
Type = MySQL
Name = arma3
Username = sqluser

Password = Passwordforuser
IP = 8*.**.**.**
Port = 3306

Share this post


Link to post
Share on other sites
Just now, [BL] Hannibal said:

Just sounds like it hasn't loaded extdb3 correctly (make sure its 'extDB3_x64.dll' is unlocked).

 

 

Make sure also that you add something like this to the "extdb3-conf.ini"

 

[SRU_DB]
Type = MySQL
Name = arma3
Username = sqluser

Password = Passwordforuser
IP = 8*.**.**.**
Port = 3306

It HAS to be arma3 as name? or can I put the name of my current database?
How do i make sure that the extDB3_x64.dll is unlocked?
Again thanks for all the help

Share this post


Link to post
Share on other sites

It must be the name of the database that you are using. Unlock dll by right clicking it and properties.

 

Stupid question but you are running a 64bit o/s right? :P

 

Unblock_dll.png

Share this post


Link to post
Share on other sites
1 minute ago, [BL] Hannibal said:

It must be the name of the database that you are using. Unlock dll by right clicking it and properties.

 

Stupid question but you are running a 64bit o/s right? :P

 

Unblock_dll.png

Yeah it's 64 bit. 
I don't have that option to unblock it..

Share this post


Link to post
Share on other sites

Then it is probably not relevant for you in that case.

 

Also pm me or the author for further help, this thread will be a bit spammed otherwise :P.

Share this post


Link to post
Share on other sites
7 minutes ago, [BL] Hannibal said:

Then it is probably not relevant for you in that case.

Well then.. I made sure, that i have put in the correct info in "extdb3-conf.ini", so i'm not sure, whats going wrong.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×