Evillyzz 0 Posted August 11, 2015 Hey, in case you didn't notice my answer in our CUP forum on how to set it up, here is the LINK And btw, thank you all for your kind words! Thanks again but I am very new to modding servers so I really don't know where to find that stuff at. Share this post Link to post Share on other sites
MrSanchez 243 Posted August 11, 2015 Directed at Alwarren because I think its his site - Will you be keeping this up to date? http://friedenhq.org/tmp/CUP_Class%20List/classlist.html Or will you at least keep it even though its outdated? I am aware that the CUP wiki has a class list too...however the reason why I prefer the way you did it here is because everything is on a single page which allows for very rapid classname searching (by using only ctrl+f) whereas on the wiki it's sorted by page on weapon category which causes it to take more time & effort to find classnames, having to go back and forth through weapon types (still pretty fast though). Just wondering. Share this post Link to post Share on other sites
aliascartoons 182 Posted August 11, 2015 Yeah, Alwarren keeps that file up to date. However you can check out our forums if you want to find out in advance about files and mod updates: http://forums.cup-arma3.org/ Share this post Link to post Share on other sites
Varanon 892 Posted August 11, 2015 Yeah, Alwarren keeps that file up to date. However you can check out our forums if you want to find out in advance about files and mod updates: http://forums.cup-arma3.org/ No, this link is old, the page has been moved to the documentation Wiki. Share this post Link to post Share on other sites
Varanon 892 Posted August 11, 2015 Or will you at least keep it even though its outdated? I am aware that the CUP wiki has a class list too...however the reason why I prefer the way you did it here is because everything is on a single page which allows for very rapid classname searching (by using only ctrl+f) whereas on the wiki it's sorted by page on weapon category which causes it to take more time & effort to find classnames, having to go back and forth through weapon types (still pretty fast though). The page will probably stay, but might not be up-to-date anymore. I guess at one point we'll provide either a PDF file with all the classnames, or a simple text file. Share this post Link to post Share on other sites
MrSanchez 243 Posted August 11, 2015 Fair enough, thanks for the answer. Share this post Link to post Share on other sites
Janez 507 Posted August 11, 2015 Hi, I made a list of magazines mass values that I think need to be adjusted compared to vanilla Arma 3 equipment. I.E. CUP 556 Stanag takes more space in inventory then vanilla Stanag magazine. You may find this list useful at least to some extent. I listed all magazines AFAIK, some are fine though IMO. I also listed most of vanilla values (except for UGL ammo types that are all the same) for quick comparison. Magazine Mass (CUP >> Vanilla like) CUP_8Rnd_9x18_Makarov_M 6 >> 4 CUP_8Rnd_9x18_MakarovSD_M 6 >> 4 CUP_10Rnd_9x19_Compact 8 >> 4 CUP_15Rnd_9x19_M9 10 >> 6 CUP_17Rnd_9x19_glock17 8 >> 6 CUP_18Rnd_9x19_Phantom 8 >> 6 CUP_6Rnd_45ACP_M 6 >> 4 CUP_7Rnd_45ACP_1911 8 >> 6 CUP_10Rnd_B_765x17_Ball_M 8 >> 6 CUP_20Rnd_B_765x17_Ball_M 8 >> 8 CUP_30Rnd_9x19_EVO 10 >> 10 CUP_30Rnd_9x19_MP5 10 >> 10 CUP_30Rnd_9x19_UZI 10 >> 10 CUP_10Rnd_9x39_SP5_VSS_M 6 >> 6 CUP_20Rnd_9x39_SP5_VSS_M 10 >> 10 CUP_64Rnd_9x19_Bizon_M 24 >> 16 CUP_64Rnd_Green_Tracer_9x19_Bizon_M 24 >> 16 CUP_64Rnd_Yellow_Tracer_9x19_Bizon_M 24 >> 16 CUP_64Rnd_Red_Tracer_9x19_Bizon_M 4 >> 16 CUP_64Rnd_White_Tracer_9x19_Bizon_M 24 >> 16 CUP_20Rnd_762x51_FNFAL_M 14 >> 12 CUP_20Rnd_762x51_B_SCAR 14 >> 12 CUP_20Rnd_TE1_Red_Tracer_762x51_SCAR 14 >> 12 CUP_20Rnd_TE1_Yellow_Tracer_762x51_SCAR 14 >> 12 CUP_20Rnd_TE1_Green_Tracer_762x51_SCAR 14 >> 12 CUP_20Rnd_TE1_White_Tracer_762x51_SCAR 14 >> 12 CUP_20Rnd_762x51_CZ805B 12 >> 12 CUP_20Rnd_TE1_Red_Tracer_762x51_CZ805B 12 >> 12 CUP_20Rnd_TE1_Yellow_Tracer_762x51_CZ805B 12 >> 12 CUP_20Rnd_TE1_Green_Tracer_762x51_CZ805B 12 >> 12 CUP_20Rnd_TE1_White_Tracer_762x51_CZ805B 12 >> 12 CUP_20Rnd_762x51_DMR 14 >> 12 CUP_20Rnd_TE1_Red_Tracer_762x51_DMR 14 >> 12 CUP_20Rnd_TE1_Yellow_Tracer_762x51_DMR 14 >> 12 CUP_20Rnd_TE1_Green_Tracer_762x51_DMR 14 >> 12 CUP_20Rnd_TE1_White_Tracer_762x51_DMR 14 >> 12 CUP_20Rnd_762x51_B_M110 14 >> 12 CUP_20Rnd_TE1_Red_Tracer_762x51_M110 14 >> 12 CUP_20Rnd_TE1_Yellow_Tracer_762x51_M110 14 >> 12 CUP_20Rnd_TE1_Green_Tracer_762x51_M110 14 >> 12 CUP_20Rnd_TE1_White_Tracer_762x51_M110 14 >> 12 CUP_20Rnd_556x45_Stanag 6 >> 6 CUP_30Rnd_556x45_Stanag 11 >> 8 CUP_30Rnd_556x45_G36 11 >> 8 CUP_30Rnd_TE1_Red_Tracer_556x45_G36 11 >> 8 CUP_30Rnd_TE1_Yellow_Tracer_556x45_G36 11 >> 8 CUP_30Rnd_TE1_Green_Tracer_556x45_G36 11 >> 8 CUP_30Rnd_545x39_AK_M 12 >> 8 CUP_30Rnd_TE1_Green_Tracer_545x39_AK_M 12 >> 8 CUP_30Rnd_TE1_Yellow_Tracer_545x39_AK_M 12 >> 8 CUP_30Rnd_TE1_Red_Tracer_545x39_AK_M 12 >> 8 CUP_30Rnd_TE1_White_Tracer_545x39_AK_M 12 >> 8 CUP_30Rnd_762x39_AK47_M 19 >> 14 CUP_30Rnd_Sa58_M 13 >> 14 CUP_30Rnd_Sa58_M_TracerG 13 >> 14 CUP_30Rnd_Sa58_M_TracerR 13 >> 14 CUP_30Rnd_Sa58_M_TracerY 13 >> 14 CUP_45Rnd_TE4_LRT4_Green_Tracer_545x39_RPK_M 22 >> 16 CUP_75Rnd_TE4_LRT4_Green_Tracer_545x39_RPK_M 36 >> 18 CUP_8Rnd_B_Beneli_74Pellets 6 >> 8 CUP_8Rnd_B_Beneli_74Slug 6 >> 8 CUP_8Rnd_B_Saiga12_74Pellets_M 6 >> 8 CUP_8Rnd_B_Saiga12_74Slug_M 6 >> 8 CUP_20Rnd_B_AA12_74Slug 26 >> 20 CUP_20Rnd_B_AA12_Pellets 26 >> 20 CUP_20Rnd_B_AA12_HE 30 >> 24 CUP_50Rnd_UK59_762x54R_Tracer 35 >> 20 CUP_100Rnd_556x45_BetaCMag 2/3 * 46 >> 20 CUP_100Rnd_TE1_Red_Tracer_556x45_BetaCMag 2/3 * 46 >> 20 CUP_100Rnd_TE1_Yellow_Tracer_556x45_BetaCMag 2/3 * 46 >> 20 CUP_100Rnd_TE1_Green_Tracer_556x45_BetaCMag 2/3 * 46 >> 20 CUP_100Rnd_TE4_Red_Tracer_556x45_M249 2/3 * 38 >> 20 CUP_100Rnd_TE4_Yellow_Tracer_556x45_M249 2/3 * 38 >> 20 CUP_100Rnd_TE4_Green_Tracer_556x45_M249 2/3 * 38 >> 20 CUP_200Rnd_TE1_Red_Tracer_556x45_M249 2/3 * 68 >> 40 CUP_200Rnd_TE4_Red_Tracer_556x45_M249 2/3 * 68 >> 40 CUP_200Rnd_TE4_Yellow_Tracer_556x45_M249 2/3 * 68 >> 40 CUP_200Rnd_TE4_Green_Tracer_556x45_M249 2/3 * 68 >> 40 CUP_200Rnd_TE4_Red_Tracer_556x45_L110A1 2/3 * 25 >> 40 CUP_200Rnd_TE4_Yellow_Tracer_556x45_L110A1 2/3 * 25 >> 40 CUP_200Rnd_TE4_Green_Tracer_556x45_L110A1 2/3 * 25 >> 40 CUP_100Rnd_TE4_LRT4_762x54_PK_Tracer_Green_M 2/3 * 68 >> 40 CUP_100Rnd_TE4_LRT4_Red_Tracer_762x51_Belt_M 2/3 * 66 >> 40 CUP_100Rnd_TE4_LRT4_White_Tracer_762x51_Belt_M 2/3 * 66 >> 40 CUP_200Rnd_TE4_LRT4_Red_Tracer_762x51_Belt_M 2/3 * 68 >> 60 CUP_200Rnd_TE4_LRT4_White_Tracer_762x51_Belt_M 2/3 * 68 >> 60 CUP_5Rnd_762x51_M24 8 >> 8 CUP_5x_22_LR_17_HMR_M 7 >> 8 CUP_5Rnd_86x70_L115A1 9 >> 10 CUP_10x_303_M 10 >> 10 CUP_10Rnd_762x51_CZ750 14 >> 8 CUP_10Rnd_762x51_CZ750_Tracer 14 >> 8 CUP_10Rnd_762x54_SVD_M 6 >> 8 CUP_5Rnd_127x108_KSVK_M 20 >> 14 CUP_5Rnd_127x99_as50_M 12 >> 14 CUP_10Rnd_127x99_M107 15 >> 16 CUP_1Rnd_HE_GP25_M 6 >> 4 CUP_1Rnd_HEDP_M203 4 >> 4 CUP_1Rnd_SMOKE_GP25_M 6 >> 4 CUP_1Rnd_SmokeGreen_GP25_M 6 >> 4 CUP_1Rnd_SmokeRed_GP25_M 6 >> 4 CUP_1Rnd_SmokeYellow_GP25_M 6 >> 4 CUP_FlareWhite_GP25_M 6 >> 4 CUP_FlareGreen_GP25_M 6 >> 4 CUP_FlareYellow_GP25_M 6 >> 4 CUP_FlareRed_GP25_M 6 >> 4 CUP_IlumFlareGreen_GP25_M 6 >> 4 CUP_IlumFlareRed_GP25_M 6 >> 4 CUP_IlumFlareWhite_GP25_M 6 >> 4 CUP_1Rnd_HE_M203 4 >> 4 CUP_1Rnd_Smoke_M203 4 >> 4 CUP_1Rnd_SmokeGreen_M203 4 >> 4 CUP_1Rnd_SmokeRed_M203 4 >> 4 CUP_1Rnd_SmokeYellow_M203 4 >> 4 CUP_1Rnd_StarCluster_Green_M203 4 >> 4 CUP_1Rnd_StarCluster_Red_M203 4 >> 4 CUP_1Rnd_StarCluster_White_M203 4 >> 4 CUP_1Rnd_StarFlare_Green_M203 4 >> 4 CUP_1Rnd_StarFlare_Red_M203 4 >> 4 CUP_1Rnd_StarFlare_White_M203 4 >> 4 CUP_FlareWhite_M203 4 >> 4 CUP_FlareRed_M203 4 >> 4 CUP_FlareYellow_M203 4 >> 4 CUP_FlareGreen_M203 4 >> 4 CUP_6Rnd_HE_M203 40 >> 24 CUP_6Rnd_FlareRed_M203 40 >> 24 CUP_6Rnd_FlareYellow_M203 40 >> 24 CUP_6Rnd_FlareGreen_M203 40 >> 24 CUP_6Rnd_FlareWhite_M203 40 >> 24 CUP_6Rnd_Smoke_M203 40 >> 24 CUP_6Rnd_SmokeRed_M203 40 >> 24 CUP_6Rnd_SmokeYellow_M203 40 >> 24 CUP_6Rnd_SmokeGreen_M203 40 >> 24 CUP_HandGrenade_M67 10 >> 10 CUP_HandGrenade_L109A1_HE 10 >> 10 CUP_HandGrenade_L109A2_HE 10 >> 10 CUP_HandGrenade_RGD5 10 >> 10 CUP_HandGrenade_RGO 10 >> 10 CUP_RPG18_M 50 >> 40 CUP_OG7_M 43 >> 40 CUP_OG9_HE_M 60 >> 60 CUP_PG7V_M 48 >> 40 CUP_PG7VL_M 57 >> 60 CUP_PG7VR_M 98 >> 80 CUP_PG9_AT_M 100 >> 100 CUP_AT13_M 2/3 * 263 >> 100 CUP_Dragon_EP1_M 2/3 * 301 >> 100 CUP_M136_M 40 >> 40 CUP_MAAWS_HEAT_M 68 >> 40 CUP_MAAWS_HEDP_M 72 >> 60 CUP_SMAW_Spotting 10 >> 10 CUP_SMAW_HEAA_M 2/3 * 138 >> 60 CUP_SMAW_HEDP_M 2/3 * 128 >> 40 CUP_NLAW_M 2/3 * 153 >> 80 CUP_Javelin_M 2/3 * 199 >> 100 CUP_Strela_2_M 2/3 * 219 >> 100 CUP_Igla_M 2/3 * 219 >> 100 CUP_Stinger_M 2/3 * 219 >> 100 CUP_PipeBomb_M 43 >> 40 CUP_TimeBomb_M 43 >> 40 CUP_Mine_M 2/3 * 160 >> 80 CUP_MineE_M 2/3 * 160 >> 80 CUP_IED_V1_M 2/3 * 160 >> 40 CUP_IED_V2_M 2/3 * 160 >> 40 CUP_IED_V3_M 2/3 * 160 >> 40 CUP_IED_V4_M 2/3 * 160 >> 40 Magazine Mass 16Rnd_9x21_Mag 6 6Rnd_45ACP_Cylinder 4 9Rnd_45ACP_Mag 6 11Rnd_45ACP_Mag 7 30Rnd_9x21_Mag 10 30Rnd_45ACP_Mag_SMG_01 10 20Rnd_556x45_UW_mag 6 20Rnd_762x51_Mag 12 30Rnd_556x45_Stanag 8 30Rnd_65x39_caseless_green 10 30Rnd_65x39_caseless_mag 10 100Rnd_65x39_caseless_mag 20 200Rnd_65x39_cased_Box 40 150Rnd_762x51_Box 40 150Rnd_762x54_Box 40 150Rnd_93x64_Mag 60 10Rnd_762x51_Mag 8 10Rnd_762x54_Mag 8 10Rnd_338_Mag 14 10Rnd_93x64_DMR_05_Mag 16 10Rnd_127x54_Mag 12 5Rnd_127x108_APDS_Mag 14 5Rnd_127x108_Mag 14 7Rnd_408_Mag 12 Laserbatteries 6 Chemlight_blue 2 SmokeShell 4 FlareGreen_F 4 HandGrenade 10 MiniGrenade 6 B_IR_Grenade 8 1Rnd_HE_Grenade_shell 4 3Rnd_HE_Grenade_shell 12 NLAW_F 80 RPG32_F 60 RPG32_HE_F 40 Titan_AA 100 Titan_AP 60 Titan_AT 100 ClaymoreDirectionalMine_Remote_Mag 20 DemoCharge_Remote_Mag 20 APERSBoundingMine_Range_Mag 20 APERSMine_Range_Mag 20 APERSTripMine_Wire_Mag 20 ATMine_Range_Mag 80 SatchelCharge_Remote_Mag 80 SLAMDirectionalMine_Wire_Mag 20 IEDLandBig_Remote_Mag 80 IEDLandSmall_Remote_Mag 40 Share this post Link to post Share on other sites
Alwarren 2765 Posted August 11, 2015 Hi, I made a list of magazines mass values that I think need to be adjusted compared to vanilla Arma 3 equipment. I.E. CUP 556 Stanag takes more space in inventory then vanilla Stanag magazine. You may find this list useful at least to some extent. I listed all magazines AFAIK, some are fine though IMO. I also listed most of vanilla values (except for UGL ammo types that are all the same) for quick comparison. The problem with these values is that there are two very distinctive quantities (mass and volume) rolled into a single number. There's never going to be anything "right" or "wrong". For example, vanilla AT mines weight (according to one of the weight tracking addons) around 2 kg, while the real AT mines weight 16. That is actually more than fits the Carryall, because in reality you cannot compare volume and mass - a 1 kg lead cube will weight as much as a 1 kg styrofoam, but the sizes will be quite different. Still, how do you measure it? IMO most of the values for vanilla content are too low. You notice that with rockets/missiles, most specialist roles have so many of them that they don't even need an ammo bearer since they can carry four already. Having said this, the weights will probably be fluent over time. When encoding the USMC and FR factions, I noticed I had to adjust some of them down to make them fit the uniforms. Thank you for your list, I'll review the values and see what I can adjust. I really REALLY wish there had been two values (mass and volume) which would make this a much more realistic exercise. Share this post Link to post Share on other sites
cyruz 103 Posted August 11, 2015 Hi, I made a list of magazines mass values that I think need to be adjusted compared to vanilla Arma 3 equipment. I.E. CUP 556 Stanag takes more space in inventory then vanilla Stanag magazine. You may find this list useful at least to some extent. I listed all magazines AFAIK, some are fine though IMO. I also listed most of vanilla values (except for UGL ammo types that are all the same) for quick comparison. Nice comparison data, I've logged this for you here as it was a ticket I had on the old feedback tracker: http://bugs.cup-arma3.org/view.php?id=20 Edit: Alwarren you're right about mass / volume needing to be separate, it's a bit of a mess... Share this post Link to post Share on other sites
SavageCDN 231 Posted August 11, 2015 Congrats excellent work! Share this post Link to post Share on other sites
veloxz 15 Posted August 11, 2015 Congratulations on your most recent bigger release guys! Will be looking into hit this evening. :) Keep it coming mates! This is the real deal for Arma 3 modding. :D Share this post Link to post Share on other sites
bumgie 49 Posted August 11, 2015 Have the guides to porting uniforms from A2 to A3 been posted yet? I would like to try and contribute. Share this post Link to post Share on other sites
sfod-d_snakebite 80 Posted August 11, 2015 Sorry if was already reported, but the link on armaholic of the units, is "wrong" it gives me the page of the weapons pack. Sorry if was already reported. Byee and congrats for your work. (little question: the H-53 in the unit pack photo, where it come from?) cheers! :) Share this post Link to post Share on other sites
Chairborne 2594 Posted August 11, 2015 Have the guides to porting uniforms from A2 to A3 been posted yet? I would like to try and contribute. Well porting the uniform itself is "easy", there's just a handful of proxies to copypaste from the character template and minor config work, the problem is there is remodeling required depending on which uniform you work on. As you probably know most A2 uniforms had things like vests and holsters embedded in a single model along with helmets and uniforms, and those have to be split. If you really want to give it a try contact me on skype, there should be the address in my profile. Sorry if was already reported, but the link on armaholic of the units, is "wrong" it gives me the page of the weapons pack. Sorry if was already reported. Byee and congrats for your work. (little question: the H-53 in the unit pack photo, where it come from?) cheers! :) The CH-53 comes from the CUP vehicle pack that has yet to be released. Share this post Link to post Share on other sites
tinter 184 Posted August 11, 2015 Are the new sounds gonna be final? I'm kind of disappointed in them, in my opinion they're really only improving by not being too loud, but other than that I would've preferred the old sounds, just a bit quieter. The new sounds are so deep that they sound flat, really no kick at all. Share this post Link to post Share on other sites
Ezcoo 47 Posted August 11, 2015 Congrats on the release! A2 content with A3 engine is the thing – thank you! :) Share this post Link to post Share on other sites
sfod-d_snakebite 80 Posted August 11, 2015 Well porting the uniform itself is "easy", there's just a handful of proxies to copypaste from the character template and minor config work, the problem is there is remodeling required depending on which uniform you work on. As you probably know most A2 uniforms had things like vests and holsters embedded in a single model along with helmets and uniforms, and those have to be split. If you really want to give it a try contact me on skype, there should be the address in my profile. The CH-53 comes from the CUP vehicle pack that has yet to be released. Oh ok, thanks for info. Share this post Link to post Share on other sites
Janez 507 Posted August 11, 2015 Are the new sounds gonna be final? I'm kind of disappointed in them, in my opinion they're really only improving by not being too loud, but other than that I would've preferred the old sounds, just a bit quieter. The new sounds are so deep that they sound flat, really no kick at all. Also, all sniper rifles seem to sound the same. What was wrong with JSRS 1.5 sounds? Share this post Link to post Share on other sites
audiocustoms 375 Posted August 11, 2015 Are the new sounds gonna be final? I'm kind of disappointed in them, in my opinion they're really only improving by not being too loud, but other than that I would've preferred the old sounds, just a bit quieter. The new sounds are so deep that they sound flat, really no kick at all. I went through this discussion many, many times (A3 Audio Tweeking for dev branch) and it is not easy to me to not sound offencive and to be tottaly clear in what i want to say. Language barrier and stuff ;) But be sure, it is absolutely not my intention to treat someone condescendingly! Also i will refer to statements on our bugtracker so see this as a more "in general" note. So first of all, this is still WIP and yes the sounds are (mostly) pretty bass/lowend heavy so it might seem a bit "muffled". This definitly needs rework. But old sounds or even JSRS like mentioned on the bugtracker are totally unacceptable. The reason is very simple and also the reason why i worked the new sounds for month (and o/c the new tail sound configs). Most, if not all of those sounds are recordings from youtube or similar. Videos recorded with camcorders or helmetcams and those microphones record anything but reallife sound. This not enough, all of those sounds, and i mean ALL, are distorted / overdriven and generally in pretty bad quality shape. So everytime somebody telling me "hey, this is what it must sound like" and points me to a youtube video i burst out laughing b/c this is totally NOT what it is in RL. Like i already mentioned crappy camera microphones, internal sound processing in the camera, dataloss while uploading, more dataloss when converted to YT audioformat and again qualityloss when audioprocessed again. So please don't get me wrong, but only guys who actually shot those weapons before know how it sounds and feels. And i dought that even 2% of the whole community ever fired a single shot. To be honest, i never did. But what i know is, there are NO adequate references on the web except sound libraries recorded from professional sound engineers. This is why i've spend a lot of money to get my hands on that. So i can assure you that more than 80% of CUP Weapon sounds are based uppon the real weapons and their sounds recorded in the US by professionals. But nevertheless like i said, this is WIP and i will do my very best to provide you with sterling sounds and keeping it as real as possible. Thanks for your input! 4 Share this post Link to post Share on other sites
Frankdatank1218 39 Posted August 11, 2015 Desperately needs HLC animations. If it had that the weapons would be excellent. Share this post Link to post Share on other sites
MrSanchez 243 Posted August 11, 2015 Good to hear that the sounds are being worked on. Share this post Link to post Share on other sites
Jona33 51 Posted August 11, 2015 Desperately needs HLC animations. If it had that the weapons would be excellent. Didn't Toadie make at least some of his source files available? Can't remember if that was only for demonstration purposes or if they could actually be used as part of CUP but his animations are so damn good. Aside from that, loving the weapon pack, I'll confess to missing some of the weirder weapons available in the older games (especially the Lee Enfield. :D) so having those back is nice. Also, a MASSIVE thank you for using that icon system in the virtual arsenal so we can see what mod the weapons belong to, I just threw this on top of my usual mods for testing (which includes RHS) so it's dead handy to have that. Share this post Link to post Share on other sites
CUP 1519 Posted August 11, 2015 CUP Weapons Pack - Hotfix v1.2.1 Mirrors: STEAM WORKSHOP, MEGA, GOOGLE DRIVE, ARMAHOLIC, PLAY WITHSIXRequires: @ASDG_JR Changelog---Weapons Pack - v1.2.1 / 2015-08-11 - Fixed: RHS conflict error CUP Units Pack - Hotfix v1.0.1 Mirrors: STEAM WORKSHOP, MEGA, GOOGLE DRIVE, ARMAHOLIC, PLAY WITHSIXRequires: @ASDG_JR, @CUP_Weapons(up ^^) Units Pack - v1.0.1 / 2015-08-11 - Fixed: ACE3 compability with USMC FR units - Fixed: No CUP icon in Arsenal You can find any additional info on our Wiki. Please report issues on our feadback tracker. Want to join or help? Contact us via an e-mail - contact@cup-arma3.org or directly on our website. For credits and other information, see our web page. Kind regards, CUP Team 1 Share this post Link to post Share on other sites
evromalarkey 150 Posted August 11, 2015 Patch version for Weapons Pack (19.4MB) - Mirrors: MEGA, GOOGLE DRIVE 1 Share this post Link to post Share on other sites
xxbbcc 6 Posted August 12, 2015 Thank you for your work on CUP - it's an excellent project. Share this post Link to post Share on other sites
