Jump to content
blazenchamber

(SMA) Specialist Military Arms

Recommended Posts

So pre 2.7 release

 

 

Come visit our new

SMA home page-    http://smaproject.com/

Check out our Arsenal of weapons and attachments that you can look forward to using when 2.7 is released.

(downloads page will be updated in next few days)

 

Update coming soon.

 

Thanks guys

  • Like 16

Share this post


Link to post
Share on other sites

Eagerly awaiting the update!

 

blazenchamber, a trivial request: can you add the sma prefix to the scar weapon pbo too?

it's the only one that isn't prefixed

Share this post


Link to post
Share on other sites

Looking really really good 👠I'm really digging that elcan specter and I really like the worn/chipped paint look on the 416. Can't wait for the release

Share this post


Link to post
Share on other sites

I didn't see the specter eclan in the version I have. Not sue if the steam version updated or not. I'll check once home.

Share this post


Link to post
Share on other sites

The elcan will be released in next update...

  • Like 1

Share this post


Link to post
Share on other sites

Hey BadHabitz

 

Thanks we are glad you like it.. Wait till you get your hands on V2.7 :D

 

I look forward to it.

 

Also, not sure if you have a project list (didn't see one specifically on your site) but I'd love to see some MP5 style weapons. Not sure how widely used they are around the world, but I know from my usage when I have limited inventory space I prefer to operate with an SMG. Not so much a request, but consider it having my vote if there's ever a conversation going on in your team.

Share this post


Link to post
Share on other sites

VFG on the 10 416!!!!! thank you!!

  • Like 1

Share this post


Link to post
Share on other sites

Hey BadHabitz

 

Thanks we are glad you like it.. Wait till you get your hands on V2.7 :D

All of the new models look absolutely fantastic! Only thing I had a question about though was the ocular lens on the T2, it appears like it's green, is that intended, or was the screenshot taken during production? I only ask because the special red/green coating on the objective lens, isn't on the ocular lens. The rear is clear, except for a very subtle blue tint.

Chances are you already knew about this, just figured I would chime in, just in case. Keep up the awesome work, those textures are sick!

Edit: Nevermind, just noticed that there was a video on the same page, and that T2 looked flawless!!!! Ugh, can't wait...

Share this post


Link to post
Share on other sites

Hi LOVE you mod only gun mod i use ! 

 

Is there any change you guys can make a ak12 with all the special forces thingies :) 

Share this post


Link to post
Share on other sites

Hi LOVE you mod only gun mod i use ! 

 

Is there any change you guys can make a ak12 with all the special forces thingies :)

 

I don't know if it's in the next patch, but it was on their to-do list that used to be in the OP.  From what I remember: Micro-red dot, Elcan, AK, reskin HK41x series, 5.56 Minimi were upcoming projects.

Share this post


Link to post
Share on other sites

I was curious, your short barrel version of the m4, I believe its called SBR, will it have a foregrip version?

Share this post


Link to post
Share on other sites

Not my question, but yes I love the mk18 as well. I was just curious from a m4 cbq perspective. Technically its already in the pack, it would just be nice to see the foregrip on it like the other rifles.

  • Like 3

Share this post


Link to post
Share on other sites

Not my question, but yes I love the mk18 as well. I was just curious from a m4 cbq perspective. Technically its already in the pack, it would just be nice to see the foregrip on it like the other rifles.

Hey Body

Yes ive done a M4 SBR with Moe grip.. Enjoy

  • Like 4

Share this post


Link to post
Share on other sites

My unit was talked tonight about a 7.62 sniper rifle, and it reminded me- weren't SMA working on a 7.62 dedicated DMR or sniper rifle of some kind? I remember you used to have 7.62 sniper rifle match ammo for the SCAR-H / HK417 but removed it as you planned to add a DMR/SR in that caliber. Also the blank ammo types/ slots in the ammo list from the removed magazines are still in Arsenal. 

Share this post


Link to post
Share on other sites

Hey Guys!

 

Is there an option to edit your showcase mission? Or is it even an option to edit it and use it for a mission of mine?

 

Greets from Germany

Share this post


Link to post
Share on other sites

My unit was talked tonight about a 7.62 sniper rifle, and it reminded me- weren't SMA working on a 7.62 dedicated DMR or sniper rifle of some kind? I remember you used to have 7.62 sniper rifle match ammo for the SCAR-H / HK417 but removed it as you planned to add a DMR/SR in that caliber. Also the blank ammo types/ slots in the ammo list from the removed magazines are still in Arsenal. 

Hey Jarrad96 yes we are currently doing the SRS sniper rifle family all 3 versions.. will be available in V3..

 

Hey Guys!

 

Is there an option to edit your showcase mission? Or is it even an option to edit it and use it for a mission of mine?

 

Greets from Germany

Hi

 

No sorry the showcase is off limits and it has been taken down from V2.7 as it is broken at the moment.. well be working to fix it up and redoo it with new gear for V3..

  • Like 3

Share this post


Link to post
Share on other sites

I just sent all of my latest ballistics data to BlazenChamber early this morning, the worst deviation was 2.85% from RL in regards to velocity difference, averages were less than 1.5% deviation, thanks to Bakerman's calculator he made for me, its really been a godsend in getting accurate airFriction values.

Just a heads up, .300 Blackout no longer has the TTSX bullet, I know some of you liked the raw damage output that round had, but I was able to get real data for a pulled US MILITARY M80A1 bullet that was loaded into a .300 Blackout casing and shot against AR500 armor and bare gel, and the results were good.

ALL of my .300 AAC Blackout ballistics are based on CUSTOM HANDLOADS that I personally made, and yes they all adhere to SAAMI specs.

 

1. Blackout EPR - 130 grain M80A1 projectile - (Remington Brass, 19.5 grains of Hodgdon Lil'Gun powder @ MAXIMUM load volume, using a Remington 7 1/2 Small Rifle Magnum primer)

*NOTE: The bullet in the center is the .300 Blackout EPR round, yes this really does exist!

2696E687-CFF6-47C5-B6A3-F40A5FEE85F8_zps

 

 

2. Blackout Subsonic - 220 Grain Round Nose Ballistic Tip /w UV GLOW when irradiated by intense light - (Noveske Brass /w black nickel plating, 8.5 grains of Alliant 2400 powder at 75% load volume, using a CCI No 41 primer)
?format=1000w



In terms of the 6.8x43 SPC round, I got rid of ALL the old 6.8x43 SPC rounds and went to the newer 6.8x43 SPC II (same cartridge, better SAAMI ratings), this has given 6.8x43 a solid chance at showing its superiority when using OTM type munitions as the FMJ round is just as standard FMJ used for target shooting, if an EPR round were made for 6.8x43 SPC II I am quite sure it would outperform 5.56 EPR across the board.

6.8x43mm SPC II

 

FMJ - Federal American Eagle factory load 115 grain FMJ projectile with a boat tail, G1 coefficient of .378 (The old one was a Remington 115 grain with a crappy boat tail, had a terrible G1 ballistics coefficient)
8ce86d6ff1a17453d17c0ae2fe604c2c.jpg

 

Ballistic Tip Boat Tail - Custom Handloaded round with a Hornady 120 grain SST bullet ((Alliant RL10X @ 27.5 grains, CCI BR4 primer, SSA-S Brass, SPC II rating MAXIMUM LOAD)
420754.jpg

 

 

Soft Point Boat Tail Subsonic - Custom Handloaded round with a 130 grain Speer HOT-COR projectile (Alliant RL9 @ 20 grains, CCI BR4 Primer, SSA-S Brass, SAAMI rating SUBSONIC LOAD)
1458_large.jpg?v=1432172234

 

 

These are some of the biggest changes aside from me completely removing the MK 319 Mod 0 Ball Barrier chambered for 7.62x51mm NATO as that round failed testing and M80A1 EPR outperforms it across the board. Oh before I forget 7.62x39 IS COMPLETED! 57-N-231S FMJ, 7N23 AP, and 57-N-231U Subsonic are all included in the next update for use in the SKS! Complete with 20 inch barrel ballistics (the SKS used had a 20 inch barrel), ENJOY!

  • Like 8

Share this post


Link to post
Share on other sites

Strictly for clarification...

 

The MK18 is by definition a 10" SBR.

 

No, the MK18 is a weapon system from a particular source (contrary to what Daniel Defense marketing says).  The MK18 can be either a 10.3" (or what Colt calls "10 inch") or 14.5" barreled M4, generally on a M16A1 lower receiver. 

 

A CQBR is a different animal, even if the parts themselves have now merged into one big pot of "things."  But there are still plenty of "MK18s" out there that aren't CQBRs or have anything to do with SOCOM (see:  USN VBSS team weapons).

  • Like 1

Share this post


Link to post
Share on other sites

Oh nice-deliberately release this just as I am going to sleep. Don't you people know it's 4.40am here? ;)

 

Thanks so much for the update-I have been looking forward to this guys.

  • Like 7

Share this post


Link to post
Share on other sites

server must be maxed out already.. getting a 503 error :o well done guys for a nicely timed release

 

 

Up now, a quick refresh and the page is available :D grabbing it now

 

:( my download keeps failing

  • Like 2

Share this post


Link to post
Share on other sites

Downloaded from website, got this error:

 

 

That usually occurs when you try to unpack a file that was not downloaded fully.Did your download cut off or anything?

  • Like 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×