Jump to content

Recommended Posts

I have an issue with bwmod/ACE. Whenever I try to give myself a Pzf3 in the virtual arsenal, it gives me an empty one; then I have no way to reload it. How do I get past this?

Share this post


Link to post
Share on other sites

I have an issue with bwmod/ACE. Whenever I try to give myself a Pzf3 in the virtual arsenal, it gives me an empty one; then I have no way to reload it. How do I get past this?

I think you might take the wrong item. It has only one shot and dispensable, so there are 2 panzerfaust item in the arsenal, one loaded with ammo and the other one is the empty / used.

Share this post


Link to post
Share on other sites

There is only one panzerfaust in the arsenal.

 

It's rather odd though. It seems like sometimes there are two and sometimes there is one. When there are two it works fine, but I don't know what causes it to switch.

Share this post


Link to post
Share on other sites

You have to select that one that is _not_ named "... (Used)" and you have to have a backpack so you can pick up a "magazine" for it. Same is true for the RGW 90.

 

It's clunky, but that is how the Arsenal works.

 

It shows the "(Used)" variant whenever you open the arsenal while having a "(Used)" one in the inventory at least once in the mission. Again strange and clunky, but it's just how the arsenal is scripted. Nothing we can or should do about that.

Share this post


Link to post
Share on other sites

Okay, thank you. I consistently get both options using your method. Could we possibly see bwmod backpacks in the next update, whenever it comes?

Share this post


Link to post
Share on other sites

There is already the Patrol Pack/Kampfrucksack backpack as well as ~7 vanilla retextures in Fleck and Tropentarn.

Share this post


Link to post
Share on other sites

I feel stupid. I forgot I got rid of the 3rd party mod for that a long time ago. Sorry for the stupid questions lmao

Share this post


Link to post
Share on other sites

Hi BWMod,

 

I have a problem, every time i try to to change the optics of a weapon in the arsenal inside the editor i get reverted back to the previous one when i exit the arsenal. Any idea why, and how to change it to another one?

 

Regards 

mwt

Share this post


Link to post
Share on other sites

Try checking your installation.

1. do you have CBA installed

2. is your version the latest available

3. try downloading the mods again

 

if nothing helps, please provide a RPT file( complete via postbin or similar) so we can help you.

Share this post


Link to post
Share on other sites

Try checking your installation.

1. do you have CBA installed

2. is your version the latest available

3. try downloading the mods again

 

if nothing helps, please provide a RPT file( complete via postbin or similar) so we can help you.

Is this an answer to my post?

 

If yes then:

1: Yes

2: Yes

3: ...and yes

 

My RPT shows a lot of errors like this: "21:28:31 Class BWA3_Attribute_LicensePlate_Base destroyed with lock count 2" Not sure what it means?

 

I must admit i am running it together with RHS... 

mwt   

Share this post


Link to post
Share on other sites

Seems like the MG4 and MG5 have lost a lot of their volume- the ricochets and impacts are louder than the gunshot. Tested with all types of ammo in Virtual Arsenal.

Share this post


Link to post
Share on other sites

@mwt

 

we need a full rpt to help you. Use pastebin or similar things. Sorry for the delay, i didn´t see it.

 

@cranesong

 

that is one of the problems with the 1.60 update that the BWmod currently has. We are working on it. Expect a hotfix within the next days.

Share this post


Link to post
Share on other sites

I've noticed since 1.60 this error message has started to appear: 

 

Jep... me too.

 

FirstPanic

  • Like 1

Share this post


Link to post
Share on other sites

Yes. We are aware of that. It's already fixed internally.

However, there is another problem with all our sounds. We use 44.1khz sampling and that is no longer supported. We are currently converting all sounds ... and will release a hotfix as soon as possible.

  • Like 2

Share this post


Link to post
Share on other sites

Yes. We are aware of that. It's already fixed internally.

However, there is another problem with all our sounds. We use 44.1khz sampling and that is no longer supported. We are currently converting all sounds ... and will release a hotfix as soon as possible.

Great to hear!

Share this post


Link to post
Share on other sites

Hey guys,

 

I have just a little asking, I run the BW mod V 1.3.3 Long time on my Server but since the last Arma 3 update to Version 1.60 i get this massange of my server

"WARNING: bwa3 requires BWA3_Comp_ACE (@ACE3) at version [1,0,0] (or higher). No valid version info found."

 

but the pbo -> bwa3_comp_ace.pbo -> both of this are from Optinal to Addons moved why i get this ?

Share this post


Link to post
Share on other sites

23:24:24 [ACE] (common) INFO: ACE is version 3.5.1.0.
23:24:24 [ACE] (common) INFO: CBA is version [2,4,0,160530] [min required [2,3,1]]
23:24:24 [ACE] (common) INFO: Extension version: ace_break_line: 3.5.0-9cb40da
23:24:25 [ACE] (common) INFO: Extension version: ace_parse_imagepath: 3.5.0-9cb40da
23:24:25 [ACE] (common) INFO: Extension version: ace_clipboard: 3.5.0-9cb40da
23:24:25 [ACE] (common) INFO: Extension version: ace_fcs: 3.5.0-9cb40da
23:24:25 [ACE] (common) INFO: Extension version: ace_advanced_ballistics: 3.5.0-9cb40da
23:24:28 String STR_CUP_dn_L129_20rnd_M not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_FFAR not found
23:24:28 String STR_CUP_DN_MAG_AGM114L_HELLFIRE_II not found
23:24:28 String STR_CUP_DN_MAG_AGM114L_HELLFIRE_II not found
23:24:28 String STR_CUP_DN_MAG_AGM114K_HELLFIRE_II not found
23:24:28 String STR_CUP_DN_MAG_AGM114K_HELLFIRE_II not found
23:24:28 String STR_CUP_DN_MAG_AGM114K_HELLFIRE_II not found
23:24:28 String STR_CUP_DN_MAG_AGM114K_HELLFIRE_II not found
23:24:28 String STR_CUP_MN_AIM9L_SIDEWINDER not found
23:24:28 String STR_CUP_MN_AIM9L_SIDEWINDER not found
23:24:28 String STR_CUP_MN_AIM9L_SIDEWINDER not found
23:24:28 String STR_CUP_MN_AIM9L_SIDEWINDER not found
23:24:28 [ACE] (nametags) INFO: TFR Detected.
23:24:31 [ACE] (common) INFO: Settings received from server.
23:24:31 [ACE] (interaction) INFO: Interaction Module Initialized.
23:24:31 [ACE] (respawn) INFO: Rallypoint Module Initialized.
23:24:31 [ACE] (common) INFO: Settings initialized.
23:24:31 [ACE] (common) INFO: 39 delayed functions running.
23:24:32 WARNING: bwa3 requires BWA3_Comp_ACE (@ACE3) at version [1,0,0] (or higher). No valid version info found.
23:24:32 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:32 Warning Message: No entry '.lineWidthThin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineWidthThick'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineDistanceMin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineLengthMin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:32 Warning Message: No entry '.lineWidthThin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineWidthThick'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineDistanceMin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineLengthMin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:32 Warning Message: No entry '.lineWidthThin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineWidthThick'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineDistanceMin'.
23:24:32 Warning Message: '/' is not a value
23:24:32 Warning Message: No entry '.lineLengthMin'.
23:24:32 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:33 Warning Message: No entry '.lineWidthThin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineWidthThick'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineDistanceMin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineLengthMin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:33 Warning Message: No entry '.lineWidthThin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineWidthThick'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineDistanceMin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineLengthMin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry 'config.bin/RscTitles/BWA3_NaviPad/Map.LineMarker'.
23:24:33 Warning Message: No entry '.lineWidthThin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineWidthThick'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineDistanceMin'.
23:24:33 Warning Message: '/' is not a value
23:24:33 Warning Message: No entry '.lineLengthMin'.
23:24:33 Warning Message: '/' is not a value
23:24:34 Error loading control config.bin/RscTitles/st_stamina_bar_visualizer/controls/IGUIBack_2200/
23:24:34 Error loading control config.bin/RscTitles/st_stamina_bar_visualizer/controls/IGUIBack_2201/
23:24:34 Error loading control config.bin/RscTitles/st_stamina_bar_visualizer/controls/IGUIBack_2202/
23:24:34 Error loading control config.bin/RscTitles/st_stamina_bar_visualizer/controls/IGUIBack_2203/

Share this post


Link to post
Share on other sites

Yes. We are aware of that. It's already fixed internally.

However, there is another problem with all our sounds. We use 44.1khz sampling and that is no longer supported. We are currently converting all sounds ... and will release a hotfix as soon as possible.

What's the problem?

16 bit, 44.1 kHz stereo files work just fine, wss from that works too. 44.1 works (and has been working forever, so I doubt it's the samplerate but then again I don't know the setup of your mod.)

Share this post


Link to post
Share on other sites

@John85oc

 

As i said before and going to say it one last time again, we need a full RPT file. Use pastebin or any other platform that can storage this amount of data.

It should be obvious that posting it here directly is not a good way. You are spaming the forum and we still can´t help you.

 

@megagoth1702

 

we converted the sounds. they are now working( coming in the next update)

Share this post


Link to post
Share on other sites

What's the problem?

16 bit, 44.1 kHz stereo files work just fine, wss from that works too. 44.1 works (and has been working forever, so I doubt it's the samplerate but then again I don't know the setup of your mod.)

Jab that's correct. commy2 mades a wrong statement.

We had WAV files in BWMod,previously. So, we resampled all sounds to 44.1kHZ and 16bit, further we made WSS files.

Share this post


Link to post
Share on other sites

Sorry but my rpt give not more errors infos about this this why i posting a half log and its was not my mind to spam this Forum i am not a spamer guy.

I have just woundering about this.

 

Its soon plannig a update from BF mod? I will wait^^ Problem its so solved its just a Info warnig massanges

Share this post


Link to post
Share on other sites

Sorry but my rpt give not more errors infos about this this why i posting a half log and its was not my mind to spam this Forum i am not a spamer guy.

I have just woundering about this.

We cannot help you if you don't provide a full RPT file. It might seem not important to you, but there are very important informations all over the file. The actual error message is the least interesting most of the time.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×