EricJ 724 Posted May 30, 2015 Well I did switch the weapons around (gun on the left, rockets on the right) so that's so far the only major change. I wanted to use the 30mm from the Kajman but it wouldn't fire from the right spot, as it would "fire" from the centerline and with the gun offset it doesn't look right... So I'm sticking with the 20mm from the Blackfoot as that works fine and is enough for government work, even if the 3D model isn't "Correct". And frankly I have enough to do as it is so it works, looks right, so therefore will stay that way. ---------- Post added at 20:46 ---------- Previous post was at 20:37 ---------- And here's the redone weapons for the DAP: http://562.50megs.com/Arma3/wip996.jpg And a female gamer request: Share this post Link to post Share on other sites
EricJ 724 Posted May 30, 2015 And some more work (got the pink right): And some Carrier MTP work. I like the green but I'm a bit OCD with it so.... The original work was done by PanzerMyer on DeviantArt so not my work as I'm still tweaking it a bit. Share this post Link to post Share on other sites
rockdpm 10 Posted May 30, 2015 And some more work (got the pink right):http://562.50megs.com/Arma3/wip1000.jpg And some Carrier MTP work. I like the green but I'm a bit OCD with it so.... http://562.50megs.com/Arma3/wip999.jpg The original work was done by PanzerMyer on DeviantArt so not my work as I'm still tweaking it a bit. I like the MTP work. Wish the entire uniform consisted of the same texture. Share this post Link to post Share on other sites
EricJ 724 Posted May 30, 2015 I can see what I can do since I have a template from Armaholic. ---------- Post added at 18:29 ---------- Previous post was at 18:15 ---------- On second thought it turned out better with a few tweaks: Share this post Link to post Share on other sites
rockdpm 10 Posted May 31, 2015 I can see what I can do since I have a template from Armaholic.---------- Post added at 18:29 ---------- Previous post was at 18:15 ---------- On second thought it turned out better with a few tweaks: http://562.50megs.com/Arma3/wip1001.jpg This is what the BI uniforms should have looked like. Good work! Share this post Link to post Share on other sites
EricJ 724 Posted May 31, 2015 (edited) Thanks! Also correction on the original artist, it was from Adyb234 on DeviantArt... Also have some more Titan-D work, CSAT and AAF themed boxes: Edited May 31, 2015 by EricJ Share this post Link to post Share on other sites
EricJ 724 Posted May 31, 2015 Made a cheap Flare Gun for the helos, it carries 2 plus the default variety of flares: Share this post Link to post Share on other sites
EricJ 724 Posted May 31, 2015 More DAP work, as well as other work: http://562.50megs.com/Arma3/wip1008.jpg http://562.50megs.com/Arma3/wip1009.jpg Share this post Link to post Share on other sites
EricJ 724 Posted June 2, 2015 Some other work with some of the vests: Yes thank you, I'm aware that the US Marine Corps have tan vests instead of MTP but my small gaming group has a couple Marines in it and they haven't complained. Regardless though I did up the damage resistance, which for some reason was pathetically low so it's a bit better than the BIS standard, which wasn't in any way realistic And yes, WIP of the Medevac version of the UH-60: http://562.50megs.com/Arma3/wip1013.jpg http://562.50megs.com/Arma3/wip1014.jpg Share this post Link to post Share on other sites
fluttershy 2 Posted June 2, 2015 Well i am pretty sure no single US Force unit is wearing British MTP Camo equipment or clothes. Reguardless - you ran into the BIS Reskin trap they setup on all Platecarriers that only came in Plain color, all Similar Magazine Flaps have the same UV Cord, therefor effects you add and camo you bring on top of it will be the exact same for every Magpouch. Nice work on the DAP, its lookin really gud, yis. I also highly approve of the pink 50. Cal Pink 50. Cal proof Share this post Link to post Share on other sites
EricJ 724 Posted June 2, 2015 (edited) Well given the reference photos I've seen plenty of US Army personnel wearing Multicam. i only use the game name ("MTP") for easy reference, but i term it "Multicam" because that's what it is. And besides the US Army is moving to the "Scorpion" camo next month. Anyway thanks but yeah I pretty much got tired of just plain equipment and wanted to tune it to my tastes. ---------- Post added at 15:06 ---------- Previous post was at 14:54 ---------- Speaking of realism issues... It was brought up in a Steam conversation that the plain Jane UH-60s will be called "UH-60s" but will still mount the miniguns in lieu of the M240s as in real life (MH-60s do carry Minis though) that the line birds the US Army operates. I've gotten quite annoyed at how adding a capability to a helicopter breaks something else and for the past week been tearing my hair out at that thing of helicopter modding. Besides I like miniguns and so that's that. Edited June 2, 2015 by EricJ Share this post Link to post Share on other sites
EricJ 724 Posted June 2, 2015 After a few hours I finally got FFV points done: Due to model realities only these two spots will have FFV points, and it was brought up by [JTG] Jack Sparrow that there was a version like the USAF Mod Pave Hawks but I may or may not, not sure yet. Share this post Link to post Share on other sites
EricJ 724 Posted June 3, 2015 Basic Raven Warfare Group work, still WIP but overall due to the mirror mapping (for optimization, thanks) so far it's only on the nose and the underside: Share this post Link to post Share on other sites
EricJ 724 Posted June 3, 2015 Even though I still have a lot of external work to do I figured I'd get it recolored: DAP: http://562.50megs.com/Arma3/wip1021.jpg Raven PMC: http://562.50megs.com/Arma3/wip1022.jpg And the Medevac (still need to tweak the Rvmats so the diamond is removed: Share this post Link to post Share on other sites
EricJ 724 Posted June 3, 2015 And with some help from WarLord554: Share this post Link to post Share on other sites
sniper pilot 36 Posted June 3, 2015 These are awesome EricJ. The Hawk Arms Race is def in full swing! Share this post Link to post Share on other sites
EricJ 724 Posted June 3, 2015 (edited) Lol yeah with the SOAR mod comes out this will probably take a backburner amongst others, but I like how it's coming out :D ---------- Post added at 12:43 ---------- Previous post was at 11:46 ---------- And on the prowl... Been trying to fix that issue with the rotor blur but it's not liking me... http://562.50megs.com/Arma3/wip1027.jpg ---------- Post added at 14:26 ---------- Previous post was at 12:43 ---------- And a basic uniform tweak: Due to laziness its essentially a NATO setup (Varmin/KRISS) as well as norminal BLUFOR helicopter gear. I was thinking of using a CQBR but for now I'll just use this. Edited June 3, 2015 by EricJ Share this post Link to post Share on other sites
EricJ 724 Posted June 3, 2015 Also finally got the flares working: Like my Wipeout skin mod the helos will have a countermeasures program (which will be outlined in the Readme) that can be selected, with the DAP having a different configuration based on the amount of dispensers that model has. ---------- Post added at 18:18 ---------- Previous post was at 17:09 ---------- More fuselage work, and removed the dust filters on the DAP version so far: http://562.50megs.com/Arma3/wip1037.jpg Also managed to get a basic HUD working for the DAP version: http://562.50megs.com/Arma3/wip1034.jpg http://562.50megs.com/Arma3/wip1035.jpg http://562.50megs.com/Arma3/wip1036.jpg Share this post Link to post Share on other sites
ice_age0815 37 Posted June 3, 2015 hi are you gone make this one to ah 60l like OFP style ? just wondering Share this post Link to post Share on other sites
EricJ 724 Posted June 4, 2015 The four pylon configuration did come to mind but currently as I understand it modern versions are two-pylon now so probably not. Currently the DAP I'm working on uses the 20mm from the Blackfoot and a pod of 12 DAGR rockets. I may do some Hellfire versions but not sure yet. Share this post Link to post Share on other sites
EricJ 724 Posted June 4, 2015 And last version to mess with, a basic MH-60M: http://562.50megs.com/Arma3/wip1039.jpg http://562.50megs.com/Arma3/wip1040.jpg Right now I'm planning on Saturday or Sunday at the latest. Also not shown is that the sides will have four FFV spots (already working) as well as six seats in the cargo area. I know yes, that the real one probably doesn't have them but I"m taking a bit of an artistic license (configuration needs, so on) given I don't know how to set the players to kneel (would be cool if I could) inside rather than sit. ---------- Post added at 00:57 ---------- Previous post was at 23:33 ---------- Disregard on the seating, WIP personnel bay area: Other than that sausage fest here's the FFV positions: Share this post Link to post Share on other sites
EricJ 724 Posted June 4, 2015 Okay managed to get the MH-60M working so far, got the spots cleaned up as well as the PMC version. Managed to incorporate the 30mm used on the Kajman (as a placeholder) until Spartan0536 does the 30mm M230 ammo, then I'll spend some time and get that worked in. Share this post Link to post Share on other sites
sniper pilot 36 Posted June 5, 2015 Yeah I'm going for my cryo sleep pod. Wake me when these beauties arrive. Share this post Link to post Share on other sites
bagpiperguy 74 Posted June 5, 2015 New Helicopter looks great cannot wait to fly it :) Share this post Link to post Share on other sites
EricJ 724 Posted June 5, 2015 Yeah I'm going for my cryo sleep pod. Wake me when these beauties arrive. Feel free to do what you like but roughly Sundayish I"ll get it out. New Helicopter looks great cannot wait to fly it :) It's pretty fun so far :) Share this post Link to post Share on other sites
