Jump to content
nkey

Task Force Arrowhead Radio

Recommended Posts

I can't use this version of TFR, please report to http://forums.bistudio.com/showthread.php?184644-Server-issue

My server's crash is due to TFR 0.96, seems to come from the key or whatever conflict with another addon. I can't tell as the crash is silent and doesn't appear in the RPT file.

:(

---------- Post added at 19:34 ---------- Previous post was at 18:54 ----------

I ahad to remove all bikeys/bisign files to make it work, there might be a conflict with "6" and "7" files ?

Had the same problem ...

I could not get the server to start with the keys in the server-key folder.

I did not really test which of both keys made it not work, but after i resigned the addon with a new key, everything worked just fine for me.

Share this post


Link to post
Share on other sites

nkey, I just wanted to thank-you for the mod and the amazing support you're putting into TFAR. It's really appreciated and enjoyed by more people than you will ever hear from!

We're running it on our dedicated, bikey'd public and private servers, often with 40 players and it's working brilliantly.

Apollo

http://www.3commandobrigade.com

Share this post


Link to post
Share on other sites

im running the latest tfar and ts3 and tfar crashes my ts and freeze my game a lot

the only way to fix this is to force close ts then restart and my arma is fine

whats causing this issue

playing on invade an annex latest versions on both altis and strais causes this issue

Share this post


Link to post
Share on other sites
im running the latest tfar and ts3 and tfar crashes my ts and freeze my game a lot

the only way to fix this is to force close ts then restart and my arma is fine

whats causing this issue

playing on invade an annex latest versions on both altis and strais causes this issue

1) Download plugins from https://www.dropbox.com/s/h7l4h4m7hklkrod/crash.zip?dl=0

2) Play with downloaded plugins (will work slowly, but it is normal)

3) Wait for crash

4) After crash - TS will show you location of dump file, upload it somewhere

5) Send link to me

6) Wait for fixed version from me

7) Repeate if required

Share this post


Link to post
Share on other sites

with 0.9.6, i dont hear the click sounds anymore when pushing the talk button :(

Share this post


Link to post
Share on other sites
with 0.9.6, i dont hear the click sounds anymore when pushing the talk button :(

Are you sure you have copied radio-sound folder in correct location? Also, what is path to your TS?

Share this post


Link to post
Share on other sites
with 0.9.6, i dont hear the click sounds anymore when pushing the talk button :(

2 main reasons:

1. Sound files is missing.

2. You are in editor.

Share this post


Link to post
Share on other sites

Re remove the 6 keys doesn't allow my dedicated server to load. Does anyone know how to fix this?

Share this post


Link to post
Share on other sites
Re remove the 6 keys doesn't allow my dedicated server to load. Does anyone know how to fix this?

Maybe some errors in RPT? Have you tried to remove both keys?

Share this post


Link to post
Share on other sites

so still cannot get the get this to show up on our server and to be hones the install is fairly straight forward so i cannot see how i have messed this up as i have had this mod running on our servers for some time? (up until now that is) I have uploaded images to show a step by step of what i have done..

Edited by gridd_66

Share this post


Link to post
Share on other sites
so still cannot get the get this to show up on our server and to be hones the install is fairly straight forward so i cannot see how i have messed this up as i have had this mod running on our servers for some time? (up until now that is) I have uploaded images to show a step by step of what i have done.

Ok so this a images that show all content for mod...

Any error in server RPT? Also, try to copy userconfig in addon folder.

Share this post


Link to post
Share on other sites

p><p><img src=[/img]

p><p><img src=[/img]

p><p><img src=[/img]

p><p><img src=[/img]

Still cannot get this to work on our server? I have used this mod for sometime but not it wont show up on server only on custom load out in scenarios?. images show a step by step of install. any help will would be grateful as yet nothing anyone has suggested has had any effect on outcome. Thank you community.

---------- Post added at 11:46 ---------- Previous post was at 11:33 ----------

Any error in server RPT? Also, try to copy userconfig in addon folder.

what do you mean by (try and copy userconfig from addons folder?) as you can see from the photots the step by step is correct it has always been in the past. It is the server... for some reason it is not seeing it as you can see from the images i have posted? scratching my head here like...

there are no errors in RPT i sent you yesterday.

Share this post


Link to post
Share on other sites

Make sure that you are running TFR on your TeamSpeak. You can double check that you have it running by clicking on your TS3 name and seeing the text in your channel description window that verifies you have it running.

Frustrating!

Share this post


Link to post
Share on other sites

I have to report a strange problem with version 0.9.6:

When I talk over the radio I hear the squawk and the radio message box at the bottom right corner of the screen says "transmitting", but the voice is transmitted as directional talk only - just as if I had no radio in my inventory. It is the same for the friend I tested with. When he uses the radio I hear his voice without the typical slight distortion and his voice carries only a few meters when wispering and a bit further when speaking or shouting. So no radio functionality for both of us.

We tested with two people on a dedicated server. We made sure that the server and both clients had TFAR 0.9.6 installed. Both of us made sure that the TS plugin was installed and we checked that Teamspeak indicated the right version. We checked that the config file was installed. We deleted TFAR from the server and both clients, rebooted our PCs and the server, downloaded TFAR again and repeated the installation. But it didn't help. We did not see any error message in-game and we verified that our radios were set to the same frequency. We checked with a self-made mission and with the standard COOP-mission "Headhunters" by BI.

Since this problem has not been reported by anyone else I guess we did something wrong but we're running out of ideas what else to try. I'd be grateful for any help - the simpler the better!

Share this post


Link to post
Share on other sites
I have to report a strange problem with version 0.9.6:

When I talk over the radio I hear the squawk and the radio message box at the bottom right corner of the screen says "transmitting", but the voice is transmitted as directional talk only - just as if I had no radio in my inventory. It is the same for the friend I tested with. When he uses the radio I hear his voice without the typical slight distortion and his voice carries only a few meters when wispering and a bit further when speaking or shouting. So no radio functionality for both of us.

We tested with two people on a dedicated server. We made sure that the server and both clients had TFAR 0.9.6 installed. Both of us made sure that the TS plugin was installed and we checked that Teamspeak indicated the right version. We checked that the config file was installed. We deleted TFAR from the server and both clients, rebooted our PCs and the server, downloaded TFAR again and repeated the installation. But it didn't help. We did not see any error message in-game and we verified that our radios were set to the same frequency. We checked with a self-made mission and with the standard COOP-mission "Headhunters" by BI.

Since this problem has not been reported by anyone else I guess we did something wrong but we're running out of ideas what else to try. I'd be grateful for any help - the simpler the better!

Have you checked you both use same radio frequency?

Share this post


Link to post
Share on other sites

Thanks for your quick reply, nkey! Yes, we checked that. We called out the frequency and we opened our radios to acually read it on the display. I also switched to another channel and back so that the frequency was displayed at the info panel.

Share this post


Link to post
Share on other sites
Thanks for your quick reply, nkey! Yes, we checked that. We called out the frequency and we opened our radios to acually read it on the display. I also switched to another channel and back so that the frequency was displayed at the info panel.

Have you played for same fraction and use same radio? Maybe it was caused by different encryption...

Share this post


Link to post
Share on other sites

Yes, we both played BluFor and we both used the type 152 radio. I am not quite sure whether we both played as Americans, though. We often use the ARC-units retex addon and one or both of us may have used this addon during the test.

Share this post


Link to post
Share on other sites

color]<img src=[/img]this is how we add strings for mods on our server...

---------- Post added at 16:55 ---------- Previous post was at 16:40 ----------

As you can see by the images there is nothing wrong with the installations as yet i can see? Is there anything anyone can recommend other?

Share this post


Link to post
Share on other sites

Hi, nkey.

I downloaded TFAR last version (0.9.6) and I can see TS3 plugins for old TeamSpeak. If my TS3 is not 3.0.16, I've got to use those plugins, right ?

What are the TS3 compatiblities for each plugin, can I use TFAR 0.9.6 with TS3 running 3.0.11 ?

Last question : Does the entire goup of players I'm playing with have to install the same plugins. Does it matter if some players got plugins for older TS3 ?

I'm not sure if my questions are properly asked, I hope you'll undertsand.

Share this post


Link to post
Share on other sites
Hi, nkey.

I downloaded TFAR last version (0.9.6) and I can see TS3 plugins for old TeamSpeak. If my TS3 is not 3.0.16, I've got to use those plugins, right ?

What are the TS3 compatiblities for each plugin, can I use TFAR 0.9.6 with TS3 running 3.0.11 ?

Last question : Does the entire goup of players I'm playing with have to install the same plugins. Does it matter if some players got plugins for older TS3 ?

I'm not sure if my questions are properly asked, I hope you'll undertsand.

It is plugins for TS with 19 API version (befor 3.0.14).

Yes, different users can use different plugins build.

---------- Post added at 17:44 ---------- Previous post was at 17:43 ----------

http://i147.photobucket.com/albums/r309/GaryCarter_2006/eight.png yes we can see it in ts....

---------- Post added at 16:40 ---------- Previous post was at 16:35 ----------

http://i147.photobucket.com/albums/r309/GaryCarter_2006/server.pngthis is how we add strings for mods on our server...

---------- Post added at 16:55 ---------- Previous post was at 16:40 ----------

As you can see by the images there is nothing wrong with the installations as yet i can see? Is there anything anyone can recommend other?

Try to install 0.9.5 on server, it should work with 0.9.6 clients.

Share this post


Link to post
Share on other sites

Down load an earlier version? do you have a link for TFR 0.9.5? i cannot see it on your page in arma 3 home page?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×