Jump to content
Brainbug

Red Hammer Campaign for use with CWR2 mod

Recommended Posts

I'd like to address a strange issue with the 1.2 version of Red Hammer. The cutscene before the mission Red Hammer (the first mission) always creates an error that prevents the scene from playing. The message "CA\water\flag_alone_big.p3d" plays and the game stops, forcing me to close the entire game. This does not exist in older builds of the game, so does anyone know what exactly the issue is?

Ich möchte ein seltsames Problem mit der Version 1.2 von Red Hammer anzugehen. Die Zwischensequenz vor der Mission Red Hammer (die erste Mission) erzeugt immer einen Fehler, der verhindert, dass die Szene vom Spielen. Die Meldung "CA \ Wasser \ flag_alone_big.p3d" spielt und das Spiel nicht mehr, mich zu zwingen, das gesamte Spiel zu schließen. Dies gilt nicht in älteren Versionen von dem Spiel gibt, so weiß jemand, was genau das Problem ist?

Share this post


Link to post
Share on other sites

Foffy i just started Red Hammer v1.2 dont have any errors, 1st mission was loaded without any problems. Maybe redownload this campaign. Try links from Arma2base or/and Armaholic.

Share this post


Link to post
Share on other sites

At the first mission, the team exits the truck before the fuel station, but do not move forward to attack...

Share this post


Link to post
Share on other sites

The first mission worked for me until now always works. The best again restart the mission.

Die erste Mission hat bei mir bis jetzt immer funktioniert. Am besten die Mission noch mal neu starten.

Share this post


Link to post
Share on other sites

@yannara

Just checked, didnt have any problems with this mission. Maybe shot few times to enemy units and your squad will attack.

Share this post


Link to post
Share on other sites

Damn it´s so hard, I can´t even pass the second mission, I always get killed, even if using saves all the time. I didn´t recall, that this was so tuff in OFP.

Share this post


Link to post
Share on other sites

AI is better in A2, they attack from long distance (wait for tank missions ;) ) Dont play in Rambo style and all should be ok. :)

Share this post


Link to post
Share on other sites

I´ve been stuck in Repulsion mission for a while now, that´s the one where I have to defend the village from 2 choppers landing infentry. My AIs get killed very fast, but I can take all platoon with the sniper. Today I managed to do that, but when I moved to the next task of the mission, to find evidence, the mission failed claiming I left the Place, and I even can´t skip this shit with the code (endmission). Jesus! :D

Share this post


Link to post
Share on other sites

@yannara

Yes, in earlier versions all missions had names (added in Intel in editor). So we can use cheats endmission or campaign(in campaign menu) when something was wrong.

Last time i checked cheat campaign we had only ~10 "cutscene" title. No missions names. This can make sometimes problems if mission is broken you can't use cheats to jump to next one. ;)

@SHJStudio

You can very easy fix this by adding missions names. ;)

Edited by tom3kb

Share this post


Link to post
Share on other sites

Thanks for the note tom3kb I did not know. Has always works for me with the cheats endmission.

Example: (left shift key - minus key Numpad - endmission.:D

Danke für den Hinweis tom3kb das wusste ich nicht. Hat bei mir mit dem cheats endmission immer Funktioniert.

Beispiel: (linke Shift Taste - Minustaste Numpad - endmission.

Share this post


Link to post
Share on other sites

Yes endmission cheat works (sorry my mistake) but if you want to fast jump for any mission its better to use cheat "campaign" (lets say you want to check something in mission 15, you use campaign cheat and you choose this mission, with "endmission" you must use this cheat 14 times).

Edited by tom3kb

Share this post


Link to post
Share on other sites
Yes endmission cheat works (sorry my mistake) but if you want to fast jump for any mission its better to use cheat "campaign" (lets say you want to check something in mission 15, you use campaign cheat and you choose this mission, with "endmission" you must use this cheat 14 times).

Nice to know, because at some mission, endmission just doesn´t work, it´s always reverts you to the mission you want to skip.

Share this post


Link to post
Share on other sites

What do you have for a problem? Is it the modification or the error Red Hammer campaign.

Share this post


Link to post
Share on other sites

I'm playing the campaign now with CWR2 1.0 and I must say this is a great experience. The missions are ironed out, the cutscenes are accurate and I am having a lot of fun. Up until now I encountered two bugs - 1. in the first mission, if your leader dies, the mission won't progress after the fuel station counter attack (I also think the leader needs to be un-killable for story reasons as well). 2. The cut-scene after the Angelina escort mission is missing a "link to a static object". Need to re-save it in the editor. This bug freezes the game and I had to alt-f4.

I am playing with game version 1.63. I will report if there are any other issues.

Share this post


Link to post
Share on other sites

The bugs have you noticed may be due to the version 1.63. Get the day the two missions again testing message. Thank you for your message Variable.

Die Bugs die dir aufgefallen sind können an der Version 1.63 liegen. Werde die Tage die zwei Missionen noch mal Testen. Danke für dein Meldung Variable.

Edited by SHJStudio

Share this post


Link to post
Share on other sites
The bugs have you noticed may be due to the version 1.63. Get the day the two missions again testing message. Thank you for your message Variable.

Die Bugs die dir aufgefallen sind können an der Version 1.63 liegen. Werde die Tage die zwei Missionen noch mal Testen Melde. Danke für dein Meldung Variable.

You just need to save again all missions in the campaign - that will fix it :)

Share this post


Link to post
Share on other sites

Thanks for the tip Variable. I Teste better again the Complete Campaign.

Danke für den Tipp Variable. Ich Teste besser noch mal die Komplette Kampagne.

Share this post


Link to post
Share on other sites

For Mission 1 since you have all the rebels in the vicinity of the gas station kill only triggers the trigger of and advance the waypoint.

Have with Cutscene 05intro.eden the error "link to a static object" fixed. I suspect that the error messages to the new version 1.0 of CWR 2 can lie.

Will continue the campaign testing and then make a new update available.

Thank you Variable :)

Zur Mission 1 da muss man alle Rebellen in der Umgebung der Tankstelle töten erst dann löst der Auslöser aus und schaltet den Wegepunkt weiter.

Habe bei Cutscene 05intro.eden den fehler "link to a static object" repariert. Ich vermute das die Fehlermeldungen an der neuen Version 1.0 von CWR 2 liegen kann.

Werde weiter die Kampagne Testen und dann ein neues Update zu Verfügung stellen.

Share this post


Link to post
Share on other sites

Thajnks SHJStudio! I've stopped playing and I'm waiting for you to issue an updated version. Will continue playing once you have it ready! Thanks :)

Share this post


Link to post
Share on other sites

Update version 1.3 is now available for download available.

Version:

1.3

Changelog v1.3:

All missions have been adapted to the current CWR 2 version 1.0.

fixed: Cutscene 05intro.eden "link to a static object".

fixed: Cutscene 17intro.abel "link to a static object".

fixed: Mission 17sniper.abel "link to a static object".

fixed: Cutscene 18intro.eden "Desktop Erro".

fixed: Mission 06defend.eden "cheat endmission"

fixed: Mission 15returnchopper.abel "cheat endmission"

fixed: All Cutscene disableuserinput "Deaktiviert".

Download:

http://www.assaultmissionstudio.de/forums/index.php?action=downloads;sa=view;down=37

Thanks Variable

Edited by SHJStudio

Share this post


Link to post
Share on other sites

Thanks!

Download link says:

Ein Fehler ist aufgetreten!

This download is not approved yet and you do not have permission to view it.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×