ski2060 167 Posted May 11, 2017 10 hours ago, xxgetbuck123 said: Isn't meant to land normally. Just like the Osprey Yeah, that's what I said. It's NOT MEANT TO LAND NORMALLY. It requires a VTOL landing. Will try to test out today's patch in a bit. Damn HOTAS is doing a slow spiral of failures and had to order a new T16000M FCS which should be in today :D Share this post Link to post Share on other sites
R3vo 2654 Posted May 11, 2017 Quote Fixed: The stealth variant of the Black Wasp was not able to fold wings via the Virtual Garage Thanks for fixing that. Here's another issue related to Jets DLC and the Virtual Garage https://feedback.bistudio.com/T124727 Share this post Link to post Share on other sites
OlegAckbar 47 Posted May 11, 2017 There was gun cross at Black Wasp HMD before, but now it's gone! Bring it back, please! Share this post Link to post Share on other sites
R3vo 2654 Posted May 11, 2017 There is still an issue with the Carrier and Eden. - Place the carrier. Save the mission - Create a new mission -> Carrier still exists but is not deleteable. Game Version: Spoiler Game: Arma 3 Version: 1.71 Build: 141672 Branch: Development Mods enabled: true (Happens without mods, too) Operating System: Windows Architecture: x64 Resolution: Width: 1920 Height: 1080 UI Scale: 0.7 Share this post Link to post Share on other sites
MK84 42 Posted May 12, 2017 With the recent changes to the VTOL flight logic, it would help tremendously if the Airbrakes can be toggled on and off instead of continuously press it to keep it deployed. 1 Share this post Link to post Share on other sites
a_killer_wombat 120 Posted May 12, 2017 4 hours ago, MK84 said: With the recent changes to the VTOL flight logic, it would help tremendously if the Airbrakes can be toggled on and off instead of continuously press it to keep it deployed. +1 Having an additional keybind for "airbrake (toggle)" would be greatly appreciated. On another note, one thing I noticed when testing out the latest VTOL flight model is that it feels like the lift generated from the wings disappears suddenly after a certain speed threshold rather than gradually decreasing as forward speed decreases. To reiterate, if I'm flying towards an LZ for a VTOL landing, I try to reduce my airspeed as quickly as possible by idling throttle, manually changing the vector to 90 degrees and holding airbrake. However, it seems like the wings still generate a constant amount of lift throughout to the process of reducing airspeed until I pass the 170kph mark at which point it feels like I suddenly lose all lift from the wings and I have to suddenly go from 0 to full throttle to keep altitude. I'm not sure I explained it right, but the VTOL flight model feels slightly off because of this sudden wing stall when the felt reduction in lift generated from the wings should feel more gradual so you can properly adjust throttle and vectoring angle to compensate. Edit: One more question, was there supposed to be a keybind option for "re-centre TGP to bore sight" or "re-centre TGP to target"? It mentions such a keybind possible in the Field manual on Dev branch but I haven't found the keybind option in controls. Share this post Link to post Share on other sites
dr. hladik 231 Posted May 12, 2017 4 hours ago, a_killer_wombat said: Edit: One more question, was there supposed to be a keybind option for "re-centre TGP to bore sight" or "re-centre TGP to target"? It mentions such a keybind possible in the Field manual on Dev branch but I haven't found the keybind option in controls. By default it should be num 5. In free mode camera will be re-centred to default direction. In locked mode it will re-center to target (if any is marked) 3 Share this post Link to post Share on other sites
Imperator[TFD] 444 Posted May 12, 2017 6 hours ago, a_killer_wombat said: +1 Having an additional keybind for "airbrake (toggle)" would be greatly appreciated. On another note, one thing I noticed when testing out the latest VTOL flight model is that it feels like the lift generated from the wings disappears suddenly after a certain speed threshold rather than gradually decreasing as forward speed decreases. To reiterate, if I'm flying towards an LZ for a VTOL landing, I try to reduce my airspeed as quickly as possible by idling throttle, manually changing the vector to 90 degrees and holding airbrake. However, it seems like the wings still generate a constant amount of lift throughout to the process of reducing airspeed until I pass the 170kph mark at which point it feels like I suddenly lose all lift from the wings and I have to suddenly go from 0 to full throttle to keep altitude. I'm not sure I explained it right, but the VTOL flight model feels slightly off because of this sudden wing stall when the felt reduction in lift generated from the wings should feel more gradual so you can properly adjust throttle and vectoring angle to compensate. Edit: One more question, was there supposed to be a keybind option for "re-centre TGP to bore sight" or "re-centre TGP to target"? It mentions such a keybind possible in the Field manual on Dev branch but I haven't found the keybind option in controls. In regards to your point about horizontal to vertical flight: This has been an item with all VTOLs even back in Arma 2. When slowing down on the approach your aircraft will 'nose-down' at roughly 180. All it takes is a simple application of even 1% throttle and you will gain control of the aircraft. You will however need to be very careful on how much thrust you apply as the bigger the aircraft (Blackfish for example) the more thrust you will need to apply in order to maintain a steady descent. See the final minutes of this video for a demonstration. As for slewing TGP; like Dr Hladik mentioned it's currently set to the "Centre View" key bind. You must have the TGP in either Area or Point mode for it to work. Share this post Link to post Share on other sites
a_killer_wombat 120 Posted May 13, 2017 In dev branch, the dynamic FOV which you get in vehicles and which is dependant on speed, has been removed for jets. However, it hasn't yet been removed for all other vehicles. Is this planned for the near future as well? I would prefer if this dynamic FOV were removed for all vehicles to keep it consistent. 5 Share this post Link to post Share on other sites
pils 49 Posted May 14, 2017 I'm currently downloading the dev branch ... please tell me the Praetorian C (Phalanx CIWS) is now able to intercept projectiles! Please, just please! I know it wasn't able a few weeks ago when I briefly tried the new stuff out. Devs please. the main purpose of that weapon system is to intercept projectiles. I'm pretty sure you guys know it was designed to intercept anti-ship-missiles (at least the slower, older ones), any kind of ATGM, any kind of artillery shell or artillery rocket, mortars, bombs (at least if they are being dropped in a few kilometers distance so the system has enough time to react). There is even quite a chance it might be able to intercept fast missiles like the Kh-25MP ( ), at least one at a time, probably not two in a salvo. But anyway, at least the ATGMs, bombs, artillery and mortar interception is a must have feature. It would be an amazing addition to the game ... and without it, the static carrier is pretty much doomed right away. 1 Share this post Link to post Share on other sites
AveryTheKitty 2626 Posted May 14, 2017 11 hours ago, a_killer_wombat said: In dev branch, the dynamic FOV which you get in vehicles and which is dependant on speed, has been removed for jets. However, it hasn't yet been removed for all other vehicles. Is this planned for the near future as well? I would prefer if this dynamic FOV were removed for all vehicles to keep it consistent. It would be much better if it was tied to acceleration rather than speed. 3 Share this post Link to post Share on other sites
venthorror 117 Posted May 14, 2017 Release day for Jets DLC is close, very close.. You can see it from here. So when It comes out I plan to go back to stable. How do I opt out of DEV branch and avoid double download at the same time? Because when you opt out, your game "updates" a few Gbs just the same... So when DEV hits stable, will it be the same version for a day? Share this post Link to post Share on other sites
Greenfist 1863 Posted May 14, 2017 17 minutes ago, venthorror said: Release day for Jets DLC is close, very close.. You can see it from here. So when It comes out I plan to go back to stable. How do I opt out of DEV branch and avoid double download at the same time? Because when you opt out, your game "updates" a few Gbs just the same... So when DEV hits stable, will it be the same version for a day? DEV is never exactly the same as any stable build, there's always some download. Right now, going from DEV to 1.70 RC there's a 1.1GB difference. So switch after the new stable is released for minimum download. Or get the release candidate build now and you'll only get the last minute changes when stable updates. 2 Share this post Link to post Share on other sites
R3vo 2654 Posted May 14, 2017 1 hour ago, venthorror said: Release day for Jets DLC is close, very close.. You can see it from here. So when It comes out I plan to go back to stable. How do I opt out of DEV branch and avoid double download at the same time? Because when you opt out, your game "updates" a few Gbs just the same... So when DEV hits stable, will it be the same version for a day? You can also switch to RC branch now, which will be the same as stable at release date. Share this post Link to post Share on other sites
iratus 71 Posted May 14, 2017 2 hours ago, pils said: I'm currently downloading the dev branch ... please tell me the Praetorian C (Phalanx CIWS) is now able to intercept projectiles! Unfortunately it is not. 2 hours ago, pils said: Devs please. the main purpose of that weapon system is to intercept projectiles. I'm pretty sure you guys know it was designed to intercept anti-ship-missiles (at least the slower, older ones), any kind of ATGM, any kind of artillery shell or artillery rocket, mortars, bombs (at least if they are being dropped in a few kilometers distance so the system has enough time to react). There is even quite a chance it might be able to intercept fast missiles like the Kh-25MP ( ), at least one at a time, probably not two in a salvo. But anyway, at least the ATGMs, bombs, artillery and mortar interception is a must have feature. It would be an amazing addition to the game ... and without it, the static carrier is pretty much doomed right away. I doupt anything like that will be in Jets DLC as it would most likely require a engine update and extensive testing would be necessary for sure. If it was planned, it should have been on devbuild since weeks. But don't loose all hope! maybe active countermeasures is something planned for Tanks DLC and they can update the Praetorian C then. 2 Share this post Link to post Share on other sites
Imperator[TFD] 444 Posted May 14, 2017 3 hours ago, venthorror said: Release day for Jets DLC is close, very close.. You can see it from here. So when It comes out I plan to go back to stable. How do I opt out of DEV branch and avoid double download at the same time? Because when you opt out, your game "updates" a few Gbs just the same... So when DEV hits stable, will it be the same version for a day? Just before you switch back rename the Jets folder in your Arma 3 root directory. Switch back and then rename the Jets folder back to its original name. You will still have to download stuff but this might cut down the amount you have to get. Share this post Link to post Share on other sites
chortles 263 Posted May 14, 2017 Dunno who to go about this but I just encountered this: the Remote Designator (NATO at least) is correctly attributed to the Marksmen DLC in the Eden objects list but mistakenly attributed to the Jets DLC in the UAV Terminal as embedded below, and in the 3D world. EDIT: It would also appear that whoever created a separate base class for the dynamic loadouts Buzzard omitted the "Laserdesignator_pilotCamera" and "Laserbatteries", meaning that the Editor-visible Buzzard (CAS) can't self-designate for its own GBU-12s... Share this post Link to post Share on other sites
froggyluv 2133 Posted May 16, 2017 Quote The disableAI / enableAI commands now work also for mine detection ("MINEDETECTION") This just reminded me of question Ive had for a long time - how exactly is it determined if AI spot a mine or not? Meaning what are the factors involved -time of day? Skill? hidden-ness of the mine?? Reason being is that there are many missions that involve taking out armor with mines but most of the time they spot them and just drive around them and id like to increase my chances without disabling it all together. Share this post Link to post Share on other sites
dr. hladik 231 Posted May 16, 2017 19 minutes ago, froggyluv said: This just reminded me of question Ive had for a long time - how exactly is it determined if AI spot a mine or not? Meaning what are the factors involved -time of day? Skill? hidden-ness of the mine?? Reason being is that there are many missions that involve taking out armor with mines but most of the time they spot them and just drive around them and id like to increase my chances without disabling it all together. it is affected by - day/night - speed - vehicle you are in - eye direction - unit skill - mine inconspicuousness - surface type 3 Share this post Link to post Share on other sites
R3vo 2654 Posted May 16, 2017 The implementation of tide simulation is pretty neat, however, coastlines look very ugly currently. Share this post Link to post Share on other sites
kecske 46 Posted May 16, 2017 Are there any props coming with the Jets DLC? I saw bomb carts in the trailer and in some screenshots, but I can't find them in the editor. 1 Share this post Link to post Share on other sites
pettka 694 Posted May 16, 2017 5 minutes ago, kecske said: Are there any props coming with the Jets DLC? I saw bomb carts in the trailer and in some screenshots, but I can't find them in the editor. We are considering addition of props to Jets DLC together with Bravo Zero One later, it depends on many factors. 5 Share this post Link to post Share on other sites
Electricleash 133 Posted May 16, 2017 (edited) 38 minutes ago, pettka said: We are considering addition of props to Jets DLC together with Bravo Zero One later, it depends on many factors. Oh! That's somewhat disappointing, there's me (possibly naively) thinking they would be sneaked in on launch day. Always a nice surprise seeing a smattering of props with the DLCs that expand the library... here's hoping these factors resolve somehow. Edited May 16, 2017 by Electricleash spelling Share this post Link to post Share on other sites
Big-Rooney 5 Posted May 16, 2017 (edited) 1 hour ago, pettka said: We are considering addition of props to Jets DLC together with Bravo Zero One later, it depends on many factors. Is it possible to detail these factors??? Out of pure curiosity Oh and the showcase VTOL is very good, enjoyed using Manual Vectoring flying around all those islands. Also I'm a +1 for the Airbrake (toggle) keybind Edited May 16, 2017 by Big-Rooney Additional entries Share this post Link to post Share on other sites
gossamersolid 155 Posted May 17, 2017 Are we ever going to see the drawPolygon command expanded? We really need the ability to set a brush/fill mode. Also it'd be great to have command(s) to get entities/objects within a polygon (array coordinates provided) rather than having to rely on radii from a center location like we currently do. 1 Share this post Link to post Share on other sites