ACE for OA 1.11

[sickboy 13]

Damn, the bug reappeared.. :confused::mad::mad:

I don't think it's a mermory problem cuz this is perfect in Vanilla.. I got 1.5Gb of VRAM.. I think it's enough ! :confused:

I join another screen :

http://s3.noelshack.com/uploads/images/441120773511_arma2oa_20110822_00265583.jpg

http://s3.noelshack.com/upload/20108212467651_arma2oa_20110822_01260089.jpg

I asked my friend with lower specs than me and they have the same problem.

Maybe my installation is wrong ? I tried to reinstall ArmA OA today. :(

I also tried another time to post an issue.. No way.

I post my RPT..

http://www.gamefront.com/files/20702217/arma2oa.RPT

I'm desperate..

It was never fixed, the ticket is still open: http://dev-heaven.net/issues/23651

Any differences with the beta? http://dev-heaven.net/issues/23651#note-4

For issues with dev-heaven tracker as said "Perhaps check your security settings / suites, and make sure to allow javascript etc." and see http://dev-heaven.net/projects/heaven/wiki/Support

Edited August 22, 2011 by Sickboy

[bob_lazar 10]

Where does ACE save the MP missions?

I've looked in the MPMissionsCache folder, but it doesn't have any ACE related missions.

Cheers

[sickboy 13]

Where does ACE save the MP missions?

I've looked in the MPMissionsCache folder, but it doesn't have any ACE related missions.

Cheers

http://ace.dev-heaven.net/wagn/Missions#Missions%20Bundled%20with%20ACE

[CorsairFlyer 10]

Thank you, I'll try to uprage ACE and test the beta patch later. :)

[roni 11]

Can someone tell me in what pbo i can find tanks, for example M1a2, and all tank shells configurations?

[sickboy 13]

Can someone tell me in what pbo i can find tanks, for example M1a2, and all tank shells configurations?

http://ace.dev-heaven.net/wagn/Classlists

e.g:

http://browser.dev-heaven.net/cfg_vehicles/config/M1A1

http://browser.dev-heaven.net/cfg_ammo/config/Sh_125_SABOT

(Click "Show full" to see incl inherited properties).

Otherwise configs inside the mod are in:

ace_c_vehicle

ace_sys_vehicledamage

and for custom assets: ***_c_veh_*** inside ACEX, ACEX_USNavy and ACEX_RU

Vehicle Damage Simulation System notes in http://ace.dev-heaven.net/wagn/Vehicle_Damage_System

Edited August 22, 2011 by Sickboy

[PTV-Jobo 820]

Has anyone noticed weapon resting only works on machine guns while laying prone? I was playing some coop like a day ago and tried to rest my weapon and couldn't. I tried on everything--walls, sandbags, humvee hoods, etc. It didn't work with anything other than the mg's and even then only when I went prone. I tried the repair function on SU because I also had the bug with player names not showing, but really disappointed seeing my favorite function not working like it use to. But right now I'm not sure if I'm the only one or not having this issue. So that's why I figured ask here first before just making a ticket too soon.

[Muahaha 10]

Couldn't figure it out myself, been trying to find out how does the "tab" mouse gesture function works. It basically just show a diagram with arrows pointing every direction and each having a certain action, but couldn't get the animation working. Am I missing something here?

[xeno 230]

Has anyone noticed weapon resting only works on machine guns while laying prone?

Caused by the (latest) beta patches. Spawned objects collide only with the ground and not with other objects like walls for example (weapon resting is using spawned collider objects to check for other objects near the player).

See:

http://dev-heaven.net/issues/23626

Couldn't figure it out myself, been trying to find out how does the "tab" mouse gesture function works.

Rather simple.

Hold the TAB key (it's the default key, can be changed in ACE options).

For example, move the mouse to the middle of the screen, hold left mouse button, move for example to the left upper corner of the screen, release mouse button, release TAB.

The check is done as soon as you release the TAB key. If the gesture string is ok it will play the corresponding gesture.

http://ace.dev-heaven.net/wagn/Mouse_Gestures

Xeno

Edited August 23, 2011 by Xeno

[friznit2 350]

Since the last update I can no longer switch/reload any thrown object other than regular grenades and smokes. Whit Phos, CS, Flashbangs, Incendiary etc are all unavailable. This is the case with both scripted and non-scripted throw modes enabled.

Just checking before I stick this on DH, is anyone else having this problem?

[sickboy 13]

Since the last update I can no longer switch/reload any thrown object other than regular grenades and smokes. Whit Phos, CS, Flashbangs, Incendiary etc are all unavailable. This is the case with both scripted and non-scripted throw modes enabled.

Just checking before I stick this on DH, is anyone else having this problem?

Disable other 3rd party mods that you have recently started using, and it will probably work again.

Let us know which one it was so we can document it.

If not then ticket with details and rpt is welcome.

[tom31c 0]

In the new update, is the MQ8 used with the UAV or ULB module, Ive tried searching on here with no luck? Thanks.....

TC

[friznit2 350]

Found the issue. It was an AAW mod that had crept into my ACE command line. Those two have never got a long very well.

[harkkam08 10]

Hey guys I have tried to get the csw function working but no avail. I have changed the interaction button and self interaction button and tested that both of these buttons bring up menu's when standing next to other objects or when its just me itself.

The problem is that I will pack a tripod from a csw transport crate and then hit the self interaction button and the other button and no menu for csw deploy appears.

It was working about a week or so ago and now its stopped working. Ive used six updater to make sure everything is running up to date and I think the latest update might have broken it.

Help please!

[PTV-Jobo 820]

Caused by the (latest) beta patches. Spawned objects collide only with the ground and not with other objects like walls for example (weapon resting is using spawned collider objects to check for other objects near the player).

See:

http://dev-heaven.net/issues/23626

Thanks for the info, Xeno. Much appreciated. Voted. :)

[sickboy 13]

Hey guys I have tried to get the csw function working but no avail. I have changed the interaction button and self interaction button and tested that both of these buttons bring up menu's when standing next to other objects or when its just me itself.

The problem is that I will pack a tripod from a csw transport crate and then hit the self interaction button and the other button and no menu for csw deploy appears.

It was working about a week or so ago and now its stopped working. Ive used six updater to make sure everything is running up to date and I think the latest update might have broken it.

Help please!

Known issue http://dev-heaven.net/issues/23660

[Westsailor 10]

Since the last update I've lost player names. I have no idea who I'm talking to standing in front of me :)

I was advised by our 'ACE expert' this issue was ID'd & patched and just to run SU verify/repair on ACE.

I did that (on all ACE mods in fact) yesterday and discovered last night I still don't display player names.

Any suggestions?

[instagoat 133]

Hello.

I updated my ACE a short while ago, and my internet is currently capped to 64kbit/sec so I cannot update. My current version is 1.11.497.

In some guns, in particular machineguns and some vehicle mounted weapons, I am noticing excessive dispersion, rendering some guns but worthless. Added is a pict showing the M134 on the PMC truck, showing the dispersion. The target was only about 150 meters away, and he was shooting at it, expending his entire ammo supply without destroying the UAZ, only killing its driver after a couple of minutes.

HMGs and coaxial MGs on tanks also show pretty bad dispersion levels. Is this intentional, or a bug on my end? I have inquired this before and I was told that the version I have now fixed this: are some of my other settings incorrect? Both AI skills and dispersion values in the config are set to 1.

Thanks for any forthcoming information on this.

[Robalo 465]

Since the last update I've lost player names. I have no idea who I'm talking to standing in front of me :)

I was advised by our 'ACE expert' this issue was ID'd & patched and just to run SU verify/repair on ACE.

I did that (on all ACE mods in fact) yesterday and discovered last night I still don't display player names.

Any suggestions?

Recognize set to "constant" will be fixed in next update.

---------- Post added at 04:48 AM ---------- Previous post was at 04:47 AM ----------

Hello.

I updated my ACE a short while ago, and my internet is currently capped to 64kbit/sec so I cannot update. My current version is 1.11.497.

In some guns, in particular machineguns and some vehicle mounted weapons, I am noticing excessive dispersion, rendering some guns but worthless. Added is a pict showing the M134 on the PMC truck, showing the dispersion. The target was only about 150 meters away, and he was shooting at it, expending his entire ammo supply without destroying the UAZ, only killing its driver after a couple of minutes.

HMGs and coaxial MGs on tanks also show pretty bad dispersion levels. Is this intentional, or a bug on my end? I have inquired this before and I was told that the version I have now fixed this: are some of my other settings incorrect? Both AI skills and dispersion values in the config are set to 1.

Thanks for any forthcoming information on this.

Is this happening only with AI using the weapons ? If so, it will be fixed next update. If it happens with player too, you should open a ticket.

Edited August 24, 2011 by Robalo_AS

[instagoat 133]

...

Is this happening only with AI using the weapons ? If so, it will be fixed next update. If it happens with player too, you should open a ticket.

This is happening only with AI. Player weapons are unaffected.

Thanks for the info too, looking forward to the next release :> really enjoyable mod!

Edit: Can you also specify which version number the fix will be in, so I know when to update to which version. Will it be 1.12?

Edited August 24, 2011 by InstaGoat

[bob_lazar 10]

Where can I download this Update 2 for ACE. All the servers seem to be running ACE 497 and ACEX 339, but I cant find that version to download.

I downloaded ACE from their site and got ACE 494 and ACEX 337 - too old.

I downloaded ACE from SixUpdater and I got ACE 501 and ACEX 340 - too new.

Any Idea where I could download these 339 and 497 versions of ACE and all the extras? I havent been able to play ACE online because of this.

Cheers.

[Robalo 465]

This is happening only with AI. Player weapons are unaffected.

Thanks for the info too, looking forward to the next release :> really enjoyable mod!

Edit: Can you also specify which version number the fix will be in, so I know when to update to which version. Will it be 1.12?

Coming with 1.12 RC2 (this Friday if I'm not mistaken). Until then you can set a higher skill for the unit in the editor to overcome this issue.

[sickboy 13]

Where can I download this Update 2 for ACE. All the servers seem to be running ACE 497 and ACEX 339, but I cant find that version to download.

I downloaded ACE from their site and got ACE 494 and ACEX 337 - too old.

I downloaded ACE from SixUpdater and I got ACE 501 and ACEX 340 - too new.

Any Idea where I could download these 339 and 497 versions of ACE and all the extras? I havent been able to play ACE online because of this.

Cheers.

You'll have to ask the server admins of the servers running old ACE versions.

Use the Health column in SU Server Browser to check if a server has matching versions.

Plenty of servers running 501: http://i56.tinypic.com/23rtnjp.png

The picture only shows signature enabled servers.

---------- Post added at 08:30 ---------- Previous post was at 08:29 ----------

Hello.

I updated my ACE a short while ago, and my internet is currently capped to 64kbit/sec so I cannot update. My current version is 1.11.497.

In some guns, in particular machineguns and some vehicle mounted weapons, I am noticing excessive dispersion, rendering some guns but worthless. Added is a pict showing the M134 on the PMC truck, showing the dispersion. The target was only about 150 meters away, and he was shooting at it, expending his entire ammo supply without destroying the UAZ, only killing its driver after a couple of minutes.

HMGs and coaxial MGs on tanks also show pretty bad dispersion levels. Is this intentional, or a bug on my end? I have inquired this before and I was told that the version I have now fixed this: are some of my other settings incorrect? Both AI skills and dispersion values in the config are set to 1.

Thanks for any forthcoming information on this.

Feel free to create a ticket with your rpt file and details http://ace.dev-heaven.net/wagn/Bug_Reporting

Edited August 24, 2011 by Sickboy

[inco9nito 10]

Hi, I think that the AI has no control with the weapons, I do not know if I'm expressing right, but the AI ​​playing with ACE lose a lot of bullets just to kill one guy.

Guys, i'm not complaining about anything, just ask them to see that part about the AI. I love playing with ACE! withou ACE not the same thing.

I made two videos showing this.

skill and precision=1

without ACE

http://www.youtube.com/watch?v=6ntRVS_bFO0

with ACE @CBA;@ACE;@ACEX

http://www.youtube.com/watch?v=QkBDMHnp4mg

sorry my english, my friends.

[Robalo 465]

Hi, I think that the AI has no control with the weapons, I do not know if I'm expressing right, but the AI ​​playing with ACE lose a lot of bullets just to kill one guy.

Guys, i'm not complaining about anything, just ask them to see that part about the AI. I love playing with ACE! withou ACE not the same thing.

I made two videos showing this.

skill and precision=1

without ACE

http://www.youtube.com/watch?v=6ntRVS_bFO0

with ACE @CBA;@ACE;@ACEX

http://www.youtube.com/watch?v=QkBDMHnp4mg

sorry my english, my friends.

Please submit a ticket with your repro mission, see link in post before yours.