Jump to content
macstu23

Consistent CTD 'Error 8876086c'

Recommended Posts

I'm new to Arma II, having recently acquired Arma II OA after a recommendation. I was however dissapointed to find that the game was freezing or crashing consistently, usually after only a couple of minutes, with the following error message coming up after a CTD;

'Error: Device reset failed. Error 8876086c'.

I was using the latest 1.54 patch with Arma II OA and BAF (also got the same consistent error with the 73478 beta patch). My PC specs are as follows;

Processor: AMD Phenom II 940 quad core

OS: Win XP Pro 32 bit

Graphics: XTX Nvidia GTX 260 (854mb) v258.96 nvidia display driver.

RAM: 2gb DDR 2

M/board: Asrock K10N78

Sound: Realtek HD onboard

I did all the recommended stuff for Nvidia users in the sticky in this forum to no avail, but after doing a bit of googling I found the following explanation for the error in Bistudio's 'Arma troubleshooting wiki':

"Cannot create system memory surface (Error code 8876086c) -

This is caused by third party content using textures with non 2^n (32,64,128,256,etc) dimensions. It may not effect all video cards."

So it seems it crashes because my GTX 260 card is 854 mb, and not 512 or 1024 mb. That is just a bit annoying. More-so since there's no mention of a fix or workaround.

Just for a laugh, I thought I'd try temporarily replacing my GTX 260 (854mb) with a Radeon HD 4670 (1024mb) that I just happened to have lying around the house. After switching the cards around and installing the latest ATI display driver, would you believe it ? Arma II runs fine on the HD 4670. No more freezing or CTD's...Yay! Sure I had to ramp the graphics down a fair bit but at least I can actually play the game now...And I'm rather enjoying it too.

However, it's just a temporary solution. There's no way I going to stay down a few notches in graphics cards just to play Arma II when my GTX 260 runs well on high visual settings with every other game I own. So I was wondering if anyone knows of a workaround for the 8876086c error or if it's an issue which is ever likely to be addressed in a future patch.

Thankyou in advance for your helpful replies.

Share this post


Link to post
Share on other sites

The reason you're seeing these crashes, is not because of your graphics card's video memory being 854 MB. This occurs because of an in-game texture that isn't 2^n dimension wise. So something in the game is using e.g. a 300x300 pixel texture, which will trigger this error message once the texture is attempted to be displayed.

I expect that all BIS textures are fulfilling this 2^n requirement (otherwise all nvidia card owners would see these crashes), so the cause is likely to be elsewhere (and thus not possible to be resolved with a patch). Either addon textures or squad logos are the cause.

Does this happen in multiplayer, and/or do you use addons?

Share this post


Link to post
Share on other sites
The reason you're seeing these crashes, is not because of your graphics card's video memory being 854 MB. This occurs because of an in-game texture that isn't 2^n dimension wise. So something in the game is using e.g. a 300x300 pixel texture, which will trigger this error message once the texture is attempted to be displayed.

I expect that all BIS textures are fulfilling this 2^n requirement (otherwise all nvidia card owners would see these crashes), so the cause is likely to be elsewhere (and thus not possible to be resolved with a patch). Either addon textures or squad logos are the cause.

Does this happen in multiplayer, and/or do you use addons?

^I should have said 896mb graphics card memory, not 854. Silly me.

I've just been playing pure vanilla OA with the BAF expansion, using the 1.54 patch and also trying out the beta patch, single-player only with no modifications. I want to be sure I've got a stable single-player game first before I go delving into multiplayer or mods.

I was experiencing the crash usually within a few minutes of gameplay whether on foot, in a vehicle or flying a helicopter, on both American and British missions. Sometimes it would CTD just from turning the camera to look around. Every time I got a CTD however, it was always that error message.

Share this post


Link to post
Share on other sites

Thankyou Dwarden. I just completed the British single-player campaign yesterday (using the Radeon card) but I shall re-install the GTX 260 later today, apply the 73643 beta patch and see how that goes.

I didn't get crash dump files with this CTD but I'll save a copy if offered.

Thanks for the CIT ticket link..i'll fill it in later.

Share this post


Link to post
Share on other sites

Okay, I re-installed the GTX 260 card this morning, installed the 73643 beta and tried it out. Still got the CTD with the same error message, so I sent a CIT ticket along with a dxdiag text file.

Just to give an example, I tried out the 'Helicopter basics' mission in Boot camp. With shadows set to 'High' I got the CTD just before reaching the first hoop. With shadows disabled I got as far as hoop 3 or 4 before I got the CTD and familiar error code. Blegh.

Thanks for looking into it for me anyway. I have Arma II ordered as well so I hope the same problem doesnt affect that game too.

Edited by macstu23

Share this post


Link to post
Share on other sites

I also have this problem, I had in in Arma 2 last year and it resurfaced in patch 1.54 for OA, nothing seems to work, multiple drivers, crossfire on or off, I don't know really.

This also came about when the issue of the flickering bug on 4870's returned, so two old problems/bugs came back in a new patch :(

I've sent off crash reports in the past.

Processor: i7 920 @ 4ghz

OS: Win XP Pro 64 bit

Graphics: 4870x2 (stock speed) v10.4 - 10.9(latest)

RAM: 6GB DDR3

M/board: Gigabyte EX58-UD5

Sound: Realtek HD onboard (Previously creative x-fi and also had problem)

I notice the only thing in common with the above user is our Direct X version, being up to date.

Edited by ChrisAA

Share this post


Link to post
Share on other sites

I will try 74132 once the group I'm in updates to that one, on 73968 at the moment.

Share this post


Link to post
Share on other sites

Help. I can not find the solution "Can not create system memory surface 4444,1500x156 (size 614400 B), Error 8876086"
Warning Message: Cannot load mipmap ori\ui\mp_topfon.paa
Warning Message: Cannot load mipmap ori\ui\gui\status_humanity_border.paa
Forced memory flush (614400 system memory surface creation failed)
Cannot create system memory surface 4444,1500x156 (size 614400 B), Error 8876086c

Spoiler

=====================================================================
== F:\Dounload\Steam\steamapps\common\Arma 2 Operation Arrowhead\ArmA2OA.exe
== "F:\Dounload\Steam\steamapps\common\Arma 2 Operation Arrowhead\ArmA2OA.exe" -connect=212.76.138.210 -port=4623  "-mod=F:\Dounload\Steam\SteamApps\Common\ArmA 2;Expansion;F:\Dounload\Steam\steamapps\common\Arma 2 Operation Arrowhead\@OriginsMod;" -maxVram=512 -nopause
=====================================================================
Exe timestamp: 2018/01/15 14:27:13
Current time:  2018/01/18 18:48:28

Version 1.63.131129

 

ArmA2OA.RPT
Virtual memory total 4095 MB (4294836224 B)
Virtual memory free 2804 MB (2940223488 B)
Physical memory free 452 MB (474378240 B)
Page file free 692 MB (726114304 B)
Process working set 894 MB (937766912 B)
Process page file used 904 MB (948334592 B)
Longest free VM region: 2146172928 B
VM busy 1354678272 B (reserved 277147648 B, committed 1077530624 B, mapped 49946624 B), free 2940157952 B
Small mapped regions: 9, size 36864 B
VID: alloc 199355576, limit 626977728, free: local 0, nonlocal 0, DX9 1876951040, virt. 2940223488
Warning Message: Cannot load mipmap ori\ui\mp_topfon.paa

Spoiler

------------------
System Information
------------------
      Time of this report: 1/18/2018, 19:38:46
             Machine name: RAVEN
    Operating System: Windows 10 Корпоративная 64-bit (10.0, Build 15063) (15063.rs2_release.170317-1834)
                 Language: Russian (Regional Setting: Russian)
      System Manufacturer: BIOSTAR Group
             System Model: G41D3+
                     BIOS: Default System BIOS
                Processor: Intel(R) Celeron(R) CPU        E3400  @ 2.60GHz (2 CPUs), ~2.6GHz
                   Memory: 3072MB RAM
      Available OS Memory: 3072MB RAM
                Page File: 2067MB used, 2928MB available
              Windows Dir: C:\WINDOWS
          DirectX Version: DirectX 12
      DX Setup Parameters: Not found
         User DPI Setting: Using System DPI
       System DPI Setting: 96 DPI (100 percent)
          DWM DPI Scaling: Disabled
                 Miracast: Not Available
Microsoft Graphics Hybrid: Not Supported
           DxDiag Version: 10.00.15063.0000 64bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
          Card name: ATI Radeon X1950 GT
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI Radeon Graphics Processor (0x7288)
           DAC type: Internal DAC(400MHz)
        Device Type: Full Device
 

 

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×